OcUK Tech Labs
 
 
OcUK Tech Labs - Asus Strix X299-E Motherboard + EKWB Water Block

OcUK Tech Labs
- Asus Strix X299-E Motherboard + EKWB Water Block

  • Asus Strix X299-E motherboard with an EK RGB Monoblock for better CPU and Mosfet cooling.
 

Built To Order

£576.98 *
configure
 
 
 
pay with amazon payments finance with V12 Finance

Stock Code: WC-17Q-TL

EAN: 0000000000000

MPN: WC-17Q-TL

Manufacturer: OcUK Tech Labs

tech communitySupported by the biggest tech community forums.overclockers.co.uk
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews

 Configure

Skylake X
Not wanted
 
Kabylake X
(1x)   Core i5-7640X 4.0GHz (KabyLake X / Basin Falls) Socket LGA2066 Processor - Retail
 
Save configuration Please copy this link to your configuration to load it in the future.
 
Product information:

- Asus Strix X299-E Motherboard + EKWB Water Block

** THIS PRODUCT IS BUILT TO ORDER AND CAN TAKE 3-5 WORKING DAYS TO COMPLETE DEPENDING ON STOCK **

Overclockers UK Tech Labs Monoblock Motherboards Feature the finest motherboard offerings on the market paired with All in One watercooling block solutions from EK Water Blocks.

A Monoblock is a specially designed waterblock that covers not just the CPU, but also cools the important sections on the motherboard in one stylish and eye catching unit. A Monoblock solution is typically a more cost effective way of cooling a motherboard too as a separate CPU block and Motherboard block would prove a lot more expensive than this stylish solution.

All Overclockers UK Tech Labs Monoblock Motherboards are professionally installed by watercooling experts who ensure that your hardware is handled with extreme care and pre tested to ensure that it arrives to you in full working order. We install the performance processor of your choice and use premium EK-TIM Ectotherm non-conductive Thermal Materials to enhance the cooling capabilities of the Monoblock and keep your hardware safe.

Included in the installation is precision installed performance thermal pads on all motherboard hot spots that will increase the thermal conductivity of the monoblock and allow maximum heat transfer from your performance hardware into your custom watercooling setup.
To install and run an Overclockers UK Tech Labs Monoblock Motherboard in your system, you will need to use appropriate watercooling hardware to support the cooling potential of the block.

Overclockers UK recommends the following for optimised performance:
- A Thick 240mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using Skylake Technology.
- A 360mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using X99 Technology.
- A Thick 360mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using Skylake Technology and a Graphics Card.
- A 480mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using X99 Technology and a Graphics Card.

These figures should be used as a rough estimate and we suggest that if adding more items into your watercooling loop that you take appropriate measures to enhance your cooling system.

Overclockers UK Tech Labs Monoblock Motherboards provide the perfect platform for CPU overclocking by giving your processor optimised running conditions to perform at its best and allow you to overclock your system to higher frequencies whilst keeping the Processor and power array on your motherboard at a lower operating temperature.

Motherboard Specification:

Format:
ATX Form-Factor (30,5 x 24,4 cm)

Chipset:
Intel X299 ("Lewisburg")

Socket:
2066 (for Intel CPUs of the Skylake-X and Kaby Lake-X Generation)

RAM:
8× DDR4 (Skylake-X: DDR4-2.666; up to 128 GB with a 44 or 28 lane CPU)
4× DDR4 (Kabylake-X: DDR4-2.666; up to 64 GB with a 16 lane CPU)
Quad-Channel (Skylake-X; supported by CPUs with 44 or 28 lanes)
Dual-Channel (Kaby Lake-X; supported by CPUs with 16 lanes)

Slots (physical):
2× PCIe 3.0 x16 (electrical x16)
1× PCIe 3.0 x16 (electrical x8)
Compatible Multi-VGA Configurations: 3-Way-SLI* (Quad-GPU), 3-Way-CrossFireX* (Quad-GPU)
2× PCIe 3.0 x4
1× PCIe 3.0 x1

<Internel Connectors:
8× SATA 6G
1× M.2 (PCIe 3.0 x4 & SATA, 2242/2260/2280/110)
1× M.2 (PCIe 3.0 x4 & SATA, 2242/2260/2280)
4× USB 3.0 (two headers)
2× USB 2.0 (two headers)
1× CPU Fan (4-Pin)
2× System Fan (4-Pin)
1× EXT_FAN Header
2× System Fan / Pump Connector (4-Pin)
2× LED Header
1× Aura Addressable Strip Header
1× Front Panel Header
1× Front Panel Audio Header
1× Thermal Sensor Connector
1× Power Button
1× Clear CMOS Jumper

External Connectors:
1× USB 3.1 (Type-C)
1× USB 3.1 (Type-A)
4× USB 3.0 (Type-A)
2× USB 2.0 (Type-A)
1× RJ45 LAN port (Intel I219V)
1× BIOS Flashback Button
1× Optical S/PDIF Out
5× Audio (SupremeFX based on ALC1220)

Power Supply:
1× 24-Pin EATX
1× 8-Pin ATX 12V
1× 4-Pin ATX 12V

Waterblock Details
This is a complete all-in-one (CPU and motherboard) liquid cooling solution for ASUS® ROG® Strix X299-E Gaming motherboard that supports new Intel® Core™ X-series LGA-2066 socket processors.

Designed and engineered in cooperation with ASUS®, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools Intel® LGA-2066 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-FB ASUS Strix X299-E RGB features high flow design and this monoblock can be easily used with weaker and silent water pump settings as well. This kind of efficient VRM cooling on an X299 platform additionally brings down the CPU temperatures compared to the traditional CPU water block and stock VRM heatsink cooling solution.

This X299 platform based monoblock also comes with a new redesigned cold plate. The new design ensures that the monoblock has better mechanical contact with the IHS of Intel® Core™ X-series LGA-2066 socket based processors, thus enabling better thermal transfer.

The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation.

The monoblock is equipped with a 4-pin RGB LED strip that connects to the motherboard's 4-pin LED header (if supported) or it can be connected to any other 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the LED strip with a custom solution as well!

Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.

The enclosed thermal pad is used on voltage regulator modules to improve cooling performance of the water block. For the CPU please use the enclosed (electrically non-conductive) thermal grease EK-TIM Ectotherm.

Enclosed:
- EK-FB ASUS Strix X299-E RGB Monoblock
- Mounting mechanism
- Thermal grease EK-TIM Ectotherm
- Thermal pads
 

More links for "- Asus Strix X299-E Motherboard + EKWB Water Block"

 

Product Specification:

Form Factor
ATX
CPU Socket
2066
Motherboard Chipset
Intel X299

Customer review

No Review Yet

This is your chance!

Be the first to review this product

Write a review

Reviews will be active after verification

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information

    Select Loan Product:

    For more information click here