+44 (0)1782 44 44 55
- Asus X299 Prime Deluxe - EKWB RGB Nickel + Plexi Water Block** THIS PRODUCT IS BUILT TO ORDER AND CAN TAKE 3-5 WORKING DAYS TO COMPLETE DEPENDING ON STOCK **
Overclockers UK Tech Labs Monoblock Motherboards Feature the finest motherboard offerings on the market paired with All in One watercooling block solutions from EK Water Blocks.
A Monoblock is a specially designed waterblock that covers not just the CPU, but also cools the important sections on the motherboard in one stylish and eye catching unit. A Monoblock solution is typically a more cost effective way of cooling a motherboard too as a separate CPU block and Motherboard block would prove a lot more expensive than this stylish solution.
All Overclockers UK Tech Labs Monoblock Motherboards are professionally installed by watercooling experts who ensure that your hardware is handled with extreme care and pre tested to ensure that it arrives to you in full working order. We install the performance processor of your choice and use premium EK-TIM Ectotherm non-conductive Thermal Materials to enhance the cooling capabilities of the Monoblock and keep your hardware safe.
Included in the installation is precision installed performance thermal pads on all motherboard hot spots that will increase the thermal conductivity of the monoblock and allow maximum heat transfer from your performance hardware into your custom watercooling setup.
To install and run an Overclockers UK Tech Labs Monoblock Motherboard in your system, you will need to use appropriate watercooling hardware to support the cooling potential of the block.
Overclockers UK recommends the following for optimised performance:
- A Thick 240mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using Skylake Technology.
- A 360mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using X99 Technology.
- A Thick 360mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using Skylake Technology and a Graphics Card.
- A 480mm Radiator for a loop including Overclockers UK Tech Labs Monoblock Motherboards using X99 Technology and a Graphics Card.
These figures should be used as a rough estimate and we suggest that if adding more items into your watercooling loop that you take appropriate measures to enhance your cooling system.
Overclockers UK Tech Labs Monoblock Motherboards provide the perfect platform for CPU overclocking by giving your processor optimised running conditions to perform at its best and allow you to overclock your system to higher frequencies whilst keeping the Processor and power array on your motherboard at a lower operating temperature.
- ATX Form-Factor (30,5 x 24,4 cm)
- Chipset: Intel X299 ("Lewisburg")
- Socket: 2066 (for Intel CPUs of the Skylake-X and Kaby Lake-X Generation)
8× DDR4 (Skylake-X: DDR4-2.666; up to 128 GB with a 44 or 28 lane CPU)
4× DDR4 (Kabylake-X: DDR4-2.666; up to 64 GB with a 16 lane CPU)
Quad-Channel (Skylake-X; supported by CPUs with 44 or 28 lanes)
Dual-Channel (Kaby Lake-X; supported by CPUs with 16 lanes)
2× PCIe 3.0 x16 (electrical x16)
1× PCIe 3.0 x16 (electrical x8)
1× PCIe 3.0 x16 (electrical x4)
Compatible Multi-VGA Configurations: 3-Way-SLI* (Quad-GPU), 3-Way-CrossFireX* (Quad-GPU)
2× PCIe 3.0 x1
- Internal Connectors:
7× SATA 6G
1× M.2 (PCIe 3.0 x4 & SATA, 2242/2260/2280/110)
1× M.2 (PCIe 3.0 x4 & SATA, 2242/2260/2280)
1× USB 3.1 (Type-C)
4× USB 3.0 (two headers)
2× USB 2.0 (two headers)
1× CPU Fan (4-Pin)
1× CPU OPT Fan Connector
4× System Fan (4-Pin)
1× EXT_FAN Header
2× System Fan / Pump Connector (4-Pin)
2× LED Header
1× Front Panel Header
1× Front Panel Audio Header
1× Thermal Sensor Connector
1× Chassis Intrusion Connector
1× Thunderbolt Connector
1× Power Button
1× Reset Button
1× Clear CMOS Jumper
1× CPU_OV Jumper
1× AAFB Connector
1× MemOk! Button
- External Connectors:
1× USB 3.1 (Type-C)
3× USB 3.1 (Type-A)
4× USB 3.0 (Type-A)
4× USB 2.0 (Type-A)
2× RJ45 LAN Port (Intel I219V)
3× WLAN Antenna Ports
1× BIOS Flashback Button
1× Clear CMOS Button
1× Optical S/PDIF Out
5× Audio (Realtek ALC1220)
- Power Supply:
1× 24-Pin EATX
1× 8-Pin ATX 12V
1× 4-Pin ATX 12V
EK-FB ASUS PRIME X299 RGB Monoblock is a complete all-in-one (CPU and motherboard) liquid cooling solution for four ASUS® Intel® X299 Chipset based motherboards that support new Intel® Core™ X-series LGA-2066 socket processors. This monoblock is compatible with the following ASUS® motherboards:
- ASUS Prime X299-A
- ASUS Prime X299-Deluxe
- ASUS TUF X299 Mark 1*
- ASUS TUF X299 Mark 2
* note that the monoblock is compatible with ASUS TUF X299 Mark 1 motherboard if the Thermal Armor is removed or modified.
Designed and engineered in cooperation with ASUS®, this monoblock uses award-winning EK-Supremacy EVO cooling engine to ensure best possible CPU cooling. This water block directly cools Intel® LGA-2066 socket type CPU, as well as the power regulation (MOSFET) module. Liquid flows directly over all critical areas, providing the enthusiasts with a great solution for high and stable overclocks. Like with every EK monoblock, EK-FB ASUS PRIME X299 RGB features high flow design and this monoblock can be easily used with weaker and silent water pump settings as well. This kind of efficient VRM cooling on an X299 platform additionally brings down the CPU temperatures compared to the traditional CPU water block and stock VRM heatsink cooling solution.
This X299 platform based monoblock also comes with a new redesigned cold plate. The new design ensures that the monoblock has better mechanical contact with the IHS of Intel® Core™ X-series LGA-2066 socket based processors, thus enabling better thermal transfer.
The base of the monoblock is made of nickel-plated electrolytic copper while the top is made of quality acrylic glass material. The nickel plated brass screw-in standoffs are pre-installed and allow for easy installation.
The monoblock is equipped with a 4-pin RGB LED strip that connects to the motherboard's 4-pin LED header (if supported) or it can be connected to any other 4-pin LED controller. The LED strip cover can easily be removed for adjusting the cable orientation or replacing the LED strip with a custom solution as well!
Unlike other solution on the market, this is a true one-piece, sturdy and reliable liquid cooling product which requires only two connector fittings for proper operation.
More links for "- Asus X299 Prime Deluxe - EKWB RGB Nickel + Plexi Water Block"