OcUK Tech Labs
Noise Dampening Kit - Lian Li PC-C32
- Using this pre cut noise reduction foam kit you can reduce the noise emitted from your case to give a more enjoyable time at your PC.
Built To Order
£29.99 *
Stock Code: CM-093-TL
EAN: 00000000
MPN: DK-ca-285-ll
Manufacturer: OcUK Tech Labs
Supported by the biggest tech community forums.overclockers.co.ukDirect Service Hotline
+44 (0)1782 44 44 55
+44 (0)1782 44 44 55
Product information:
The more heat is exposed from hardware the more openings and fans are needed for its cooling. Each case opening provides a way for the sound to reach the outside and there with be perceived as noise. Depending on how comprehensive the covering of the housing with dampening mats is, the quieter it is.
There are three levels of dampening - the first should be installed in any case the second only if you don´t use additional fans and very effective hardware is installed. The first stage includes the right side panel, front part of the left side panel, upper front, the whole floor, a part of the top cover and the middle part of the backside backside. Second stage would include the rear part of the left side panel, the middle and the lower front. In the last stage the fans in the top cover and the back are replaced by dampening mats.
- Compatible with the
- Pre cut to size to dampen every part of your case
- Self adhesive tape pre-applied
Noise Dampening Kit - Lian Li PC-C32
All mats are pre-cut and fit exactly in the planned position. It is not necessary to install all of them. Thus it is more important to achieve a balance of cooling and dampening, also depending on the hardware installed.The more heat is exposed from hardware the more openings and fans are needed for its cooling. Each case opening provides a way for the sound to reach the outside and there with be perceived as noise. Depending on how comprehensive the covering of the housing with dampening mats is, the quieter it is.
There are three levels of dampening - the first should be installed in any case the second only if you don´t use additional fans and very effective hardware is installed. The first stage includes the right side panel, front part of the left side panel, upper front, the whole floor, a part of the top cover and the middle part of the backside backside. Second stage would include the rear part of the left side panel, the middle and the lower front. In the last stage the fans in the top cover and the back are replaced by dampening mats.
- Compatible with the
- Pre cut to size to dampen every part of your case
- Self adhesive tape pre-applied
More links for "Noise Dampening Kit - Lian Li PC-C32"
Recently Viewed
Customer review
No Review Yet
This is your chance!
Be the first to review this product
Write a review