+44 (0)1782 44 44 55
Eclipse P300 Air Midi Tower Case - Black Window
The cases of the Eclipse P300 series provide entry-level prices with professional-level features, prfect for newbies and PC enthusiasts alike with an array of interesting features. With an illuminated power button as well as an LED strip on the left side, the Dutch company brings the goods when it comes to RGB lighting - just as you'd expect. What makes the Eclipse P300A special however, is without doubt the stunning side window that comes in tinted and tempered real glass, meaning that users will enjoy a breathtaking view of the full interior of their PC. Needless to say, this leaves quite an impression.
The PHANTEKS Eclipse P300 Air Midi-Tower with Tempered Glass at a Glance:
- Premium Midi-Tower with tempered glass side window
- Mesh front with optimised structure for maximum airflow
- Compatible with motherboards up to ATX form factor
- Plenty of space for air- or water cooling
- A 120 mm fan comes pre-installed as standard
- 1x 2.5" slot & 2x 2.5-/3.5" slot
- Graphics cards up to 355 mm long supported
- Removable, magnetic dust filter in roof
Premium Midi-Tower with Tempered Glass Window & Mesh Front
The PHANTEKS Eclipse P300 Air Midi-Tower from the PHANTEKS Eclipse series makes quite the impression with its use of clean lines with a premium yet reserved design in satin-black. The large tinted and tempered glass side window lends the case an undeniably high-end enthusiast look. The front of the case is equipped with optimised mesh to help take airflow up another level, as such, cooling has been front and centre of PHANTEKS' development process.
Located in the centre of the roof and towards the front, users will see the illuminated power button, while both audio connectors and USB 3.0 ports of the front panel are angled towards the right side. The majority of the roof is taken up by the presence of a large, removable dust filter, which has the look of a kind of mesh grid and is situated over the top of the requisite air inlets.
Medium-Sized Case for Gaming Graphics Cards
The black interior of the Eclipse P300A also manages to distinguish itself from the competition with its ultra-premium looks and the PSU shroud that is subdivided into two sections. This means that the PSU shroud is able to conceal the drive bays which are rotated to a 90-degree angle. These enable tool-free installation of two 3.5- or 2.5" drives via the front, after removing the front cover of course. Behind the motherboard tray users will be pleased to know that an SSD can be mounted using the "Drop-N-Lock" SSD bracket, with a second bracket also possible as an upgrade. In terms of cable management, the case reserves 35 mm of space, meaning that there's more than enough room to stow things away neatly. Velcro cable guides also help users get an extremely clean case interior.
For casual- and hardcore gamers, the PHANTEKS Eclipse P300 Air offers all the mod-cons for high-end gaming hardware that you could expect, for example graphics cards up to 355 mm in length are compatible and the presence of radiator mountings for AiO- and custom water cooling solutions. The rear of the case offers a mounting point for one 120 mm fan or similar-sized radiator, while the front supports either two 120 mm fans or 140 mm fans. As an alternative to the front-mounted fans, either a 240- or 280 mm radiator can be installed instead.
In addition to the pre-installed 120 mm fan in the rear, a 120- or 140 mm case fan can be mounted in the roof of the case. Those who prefer to use tall CPU coolers are well taken care of thanks to compatibility for coolers up to a height of 16.5 cm. Power supplies up to 200 mm in length are compatible for powering your new high-end gaming system.
- Dimensions: 200 x 455 x 400 mm (W x H x D)
- Weight: approx. 6 kg
- Material: Steel, plastic, tempered glass
- Colour: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
2x 120/140 mm (Front)
1x 120/140 mm (Roof)
1x 120 mm (Rear)
1x 120 mm (rear)
- Radiator Mountings (partially forfeits HDD- and/or fan slots):
1x max. 240/280 mm (front)
1x max. 120 mm (rear)
- Filter: Front, PSU, roof (removable)
- Drive bays:
1x 2.5 Zoll (behind motherboard tray, 1x additional possible via optional SSD bracket)
2x 2.5/3.5" (internal; tool-free installation)
- Power supply: 1x Standard ATX (optional)
- Expansion slots: 7
- I/O Panel:
1x Power Button
2x USB 3.0
- Max GPU length: 355 mm
- Max CPU cooler height: 165 mm
- Max PSU length: 200 mm
- Front Radiator:
240: 122 x 315 mm
280: 142 x 315 mm