+44 (0)1782 44 44 55
Enthoo Evolv ATX Glass Mid Tower Case - Silver
The Phanteks Enthoo Evolv ATX Midi-Tower in the Tempered Glass-Edition is a visually polished version of the basic Enthoo Evolv ATX. This new variant now provides stylish side panels consisting of tempered glass and that offer a view of both sides of the case's interior. Apart from the PWM fan hub and the dust filters for the front and the PSU shroud, the case offers three pre-installed 140 mm fans that can be supplemented by the addition of more fans or radiators (up to 360 mm). Moreover, the case fits motherboards up to E-ATX in size and a maximum of five 3,5"- and four 2,5" storage devices, two 2,5"- can also take the place of two 3,5" drives.
The Most Important Features of the Phanteks Enthoo Evolv ATX Midi-Tower in the Tempered Glass Edition:
- Premium design thanks to tinted tempered glass side panels and premium materials
- Compatible with motherboards up to E-ATX (264 mm wide)
- PWM fan hub, two dust filters & three 140 mm fans pre-installed
- Concealed I/O panel with two USB 3.0- and HD Audio connectors
- Space for five 3,5"- & four 2,5" storage devices (2x 2,5" instead of 3,5")
- Supports graphics cards up to 42 cm long, CPU coolers up to 19,4 cm & PSUs up to 31,8 cm
Timeless, Elegant Design with Large Side Windows
The interior consists of steel painted silver, the removable front panel as well as the roof of the case consist of 3 mm think aluminium which comes anodised in silver. The left- and right side walls consist of large tinted, tempered glass panel which is held in place via four screws and offers an impressive panorama inside the case and your hardware.
The lower section of the front comes with a narrow light strip that glows when switched on and the colour can be varied by means of the various LEDs included in the bundle. Ventilation inlets are integrated into the gaps between the aluminium panel in order to maintain the minimalist aesthetic. The same approach is taken for the I/O panel, which is concealed under a flat in the front and offers two USB 3.0 ports and HD Audio ports.
Cooling Options and Hard Drives
Behind the frontpanel lie two factory-installed 140 mm fans for your use and the rear offers an additional 140 mm fan. The front of the case and the PSU slot in the bottom of the case come with removable dust filters. The array of fans in the roof and behind the front cover can include up to two 140- or even three 120 mm fans. As an alternative, either a 280- or a 360 mm radiator can also be installed. The rear allows the installation of a 120 mm or a 140 mm radiator instead of a fan should you prefer - all in all rendering this case powerful airflow both in terms of intake and exhaust along with huge amounts of space for water cooling components.
The power supply, which in this case would be mounted in the bottom and is walled off from the rest of the hardware's airflow for maximum cooling efficiency, is located beneath a silver metallic shroud that lends the interior an incredibly tidy aesthetic. Two drive cages for 2,5" or 3,5" storage devices are situated towards the front. Alternatively, the bundled anti-vibration pump bracket can be mounted here instead. Should you wish to use this in conjunction with a large reservoir or install a radiator behind the front cover, a section of the horizontal divider can be removed to offer more options in terms of pump and reservoir locations.
The case offers an abundance of possibilities for installing drives and water cooling. Likewise the reverse side of the front panel gives users the option of installing additional 3,5"- or 2,5" drives with the help of three included trays - the trays come screwed to the motherboard support tray. Additionally, two more drives can be mounted with the help of the optionally available trays.
What Features does the Back of the Motherboard Tray Offer?
The reverse of the motherboard tray, where 35 mm of space is available for easy cable management also comes with a pre-installed PWM fan hub which enables the automatic regulation of up to eight 3-pin fans via a single 4-pin PWM connector on the motherboard.Two 2,5" "Drop-n-Lock" brackets for small 2,5" drives are available, a further bracket of this kind can be mounted sideways on the PSU shroud.
- Dimensions: 235 x 495 x 510 mm (W x H x D)
- Weight: approx. 10,2 kg
- Material: Steel (Chassis), aluminium (3mm; Front, Deckel), Tempered Glass (sides)
- Colour: Silver
- Form Factor: E-ATX (up to 264 mm wide), ATX, Micro-ATX, Mini-ITX
- Total Possible Fans:
2x 140 / 3x 120 mm (front)
2x 140 / 3x 120 mm mm (roof)
1x 140/120 mm (rear)
2× 140 mm (Front; PH-F140SP, 1.200 RPM, 19 dB(A))
1× 140 mm (Rear; PH-F140SP, 1.200 RPM, 19 dB(A))
- Radiator Mountings (partly forfeits HDD- and/or fan slots):
1x max. 280/360 mm (front)
1x max. 140/120 mm (rear)
1x max. 280/360 mm (top)*
*Distance to motherboard tray with 120mm: 68 mm
*Distance to motherboard tray with 140mm: 48 mm
Please ensure you check the maximum RAM height!
- Filter: Front, PSU (removable)
- Drive Bays:
5x 3,5" (internal; + 3x optional via separately available HDD bracket PH-HDDKT_02)
4x 2,5" (internal; 2x instead of 3,5"; 2x via SSD bracket behind the motherboard tray with "Drop-n-Lock" + 1x or 2x optional via separately available SSD bracket GEPH-009 or. GEPH-010)
- PSU: 1x Standard ATX (optional)
- Expansion Slots: 7
2x USB 3.0
- Max GPU Length: 420/300 mm (without/with HDD brackets)
- Max CPU Cooler Height: 194 mm
- Maximale PSU Length: 318 mm
- Guarantee: 5 Years
More links for "Enthoo Evolv ATX Glass Mid Tower Case - Silver"
This article is used in:
Awards & Media Coverage
"Overall we were very impressed by the Evolv ATX Tempered Glass Edition and think it is well worth the asking price... it really doesn't make sense to use an all-in-one liquid cooler in this case. Switch to a custom loop on your CPU and GPU and the pieces all fall in to place."Award