Enthoo Primo Full Tower Case - White Edition

  • The new standard with Phanteks’ release of their first Enthoo series case. Passionate about cooling and the one that brought you the world’s best air coolers
  • Phanteks enters the case arena
pay with credit card pay with amazon payments pay with bitcoin Pay by Finance with Hitachi Personal Finance

Stock Code: CA-001-PT

EAN: 0886523300038


Manufacturer: Phanteks

tech communitySupported by the biggest tech community
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews
Product information:

Enthoo Primo Full Tower Case - White Edition

The bar has been set to a new standard with Phanteks’ release of their first Enthoo series case. Passionate about cooling and the one that brought you the world’s best air coolers, Phanteks enters the case arena with their functional design with exceptional cooling possibilities, the Enthoo Primo.

Accessibility and functionality is what sets the Enthoo Primo on a level of its own. It was constructed from a builder’s point of view with the closest attention to detail. This Enthoo Primo combines innovative design and rich styling that appeal to builders of any caliber. A glimpse through the split window side panel reveals the clean interior, capable of being water cooled, air cooled, or both.

Phanteks’ Enthoo Primo, unleash unlimited possibilities.


- Colour: White / White LED
- Form Factor: Full tower
- 5 Phanteks’ PH-F140SP premium 140 mm fans included
- Material(s): Aluminum faceplates, Steel chassis
- Motherboard support: ATX, EATX, mATX, SSI EEB
- Front I/O: 2x USB 3.0, 2x USB 2.0, Mic, Headphone, LED switch
- Side window: Yes, split-window design
- Expansion slots: 8
- Power Supply Slots: 2
- Dimension: 250(W) x 650(H) x 600(D) mm
- Warranty: 5 years

Drive Bays
- External 5.25” 5
- Internal 3.5” 6 (2x 3HDD cages)
- Internal 2.5” 12 (2x 3HDD cages + 2x doublestack SSD brackets *expandable to 3x)

Cooling (120mm fans)
- Front: 2x
- Top: 4x
- Side: 2x
- Rear: 2x
- Bottom: 4x
- HDD: 2x
- The PWM hub will enable PWM function to 3-pin fans. Total of 11 fans can be connected to the PWM hub.

Extensive water cooling support provides 5 different installation areas for slim and thick radiators varying from single to quad (120mm and 140mm form factors) with clearance for push-pull fan configurations.

Liquid Cooling Features
- Reservoir Brackets
- Pump Bracket

Radiator Support
- Front: Up to 240mm
- Top: Up to 480mm or 420mm
- Side without HDD Cages: Up to 240mm
- Rear: 120mm or 140mm
- Bottom: Up to 480mm or 280mm

- CPU cooler 207mm - Cable management 30mm


More links for "Enthoo Primo Full Tower Case - White Edition"


Product Specification:

Case type
Form Factor
E-ATX, ATX, Micro-ATX, Mini-ITX, EEB
Side panel
Main colour
Accent colour
Noise dampening
Width (exact)
Height (exact)
Depth (exact)
200 - 300 mm
600 - 700 mm
600 - 700 mm
Aluminium, Steel
Weight (exact)
16 - 18 kg
USB 3.0
Audio output
Audio input
Internal 2.5" bays
Internal 3.5" bays
External 5.25" bays
PCI slots
Motherboard tray
Cable management
Front LCD/TFT display
Power supply
Power supply format
Power supply position
Rear side
Fans pre-installed
5x 140mm
120mm Fan
140mm Fan
Fan colour
Black, White
Fan controller
Card reader
Front door
Position I/O
HDD anti-vibration
1x Single (140mm), 2x Dual (240mm), 2x Dual (280mm)

Customer review

100% (4)
0% (0)
0% (0)
0% (0)
0% (0)
Star Rating

Average customer rating

(from 4 customer reviews)
All Time (4)

Love the cable management

I have been building/upgrading my own PC for over 20 years, I have never rly bothered with cable management, but this case as soon as you open it is cable managed! So as I was adding components I also managed my cables, I could of probably done a better job of where the GPU power lead comes from and made that a little tidier, but omg it was so easy!

The build quality of this case is outstanding and the little box of screws is like a cherry on top of a cake. It is really heavy but I see that as a good thing, means some good quality materials were used :)

My only niggle was there is a Male molex connection with a label of "LED strip" on it. I spent a good 5 mins trying to figure out what to connect it too as the molex from my PSU are also Male. So I ended up just leaving it and just connecting the SATA power leads up. Low and behold the LED strip still works :D

Anyway, if you want to use Radiators and/or Reservoirs this case has ample room for them.

Also top notch customer service from OCuk as usual, also DPD are very awesome too!

Andy 2017-01-03

Huge case, with lots of possibilities

When this case arrived I was staggered by the size of the box. Even out of its packaging it's not a lot smaller. This is a really big case, and it's definitely a good idea to check that it will fit where you're planning to put it before you buy.

The upside of this is that there is plenty of room for system building. If you're watercooling, there are mounting points for several radiators (120 or 140 wide), and dedicated pump and reservoir mounting points. What's more, they've actually thought about this and most of the mounts, holes and spaces are well positioned and easy to build into. Vents and fans about. There's an inbuilt fan controller breakout board, and inbuilt connectors for LEDs. You can fit two power supplies, should you desire, one of which is hidden behind the motherboard tray. Cable management is excellently provided for, with rubber grommeted holes through metal panels and plenty of velcro cable ties behind the motherboard tray. On the storage side, the hard drive mounting space is capacious *and* modular, with additional SSD mounting points.

I have only two quibbles with this otherwise excellent case: First, the reservoir mounting bracket (which can show off a cylindrical coolant reservoir nicely behind the large acrylic window) was designed in the days when SLI graphics cards were usually in slots next to each other. With modern motherboards and larger graphics cards you may have to omit the bracket or mod it to fit your cards.

Second, and most infuriating of all, the power button is on the front at my knee height. I keep accidentally bumping the power button with your knee when I'm in the middle of a game, and it's driving me to despair.


Good Case

Built my pc yesterday using this case, fantastic build quality and plenty of space. Mounted 2x R9 295X2's with ease and I love the cable management in this box. The case has a lovely finish too, only downside but to be expected with a case of this size is the weight, very heavy even when empty.



il put it in one quality beautifully finished I like the white better than the black version excellent case all round id recommend this case 100%


Write a review

Reviews will be active after verification

* Required field

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    Bought to order

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.