PH-TC14PE CPU Cooler - Orange

  • Socket Compatibility: 775 / 1150 / 1155 / 1156 / 1151/ 1366 / 2011 / AM2 / AM2+ / AM3 / FM1 / FM2

Stock Code: HS-003-PT

EAN: 0886523000044


Manufacturer: Phanteks


Product information: PH-TC14PE CPU Cooler - Orange

Phanteks PH-TC14_PE twin tower thermal radiator design uses the latest aerospace technology. By using P.A.T.S to increase cooling performance and C.P.S.C Technology to enhance thermal conductivity, heat will easily dissipate, creating an opportunity for greater overclocking. Combined with Dual Phanteks PH-F140 Premium 140mm Fans, easy-to-install SoliSku mounting kit and PH-NDC thermal compound. With unique colours, the Phanteks PH-TC14 is setting the new standard for today’s CPU coolers.

TECHNIAL INFORMATION - Intel Socket LGA 2011,1155,1156, LGA 1366, LGA775 and AMD AM2/2+/AM3 (stock backplate required)
- Fan Size: 140x140x25 , Dual Fans included. - Full PWM Adapter included - Fan Compatibility: 140x140x25mm x 3 pcs, (120 x120 x25mm x 3 pcs). (Third fan clips and accessory included). - Heatsink Dimensions without Fan: 134 x 140 x 160mm (LxWxH) - Heatsink Dimensions with Dual Fans: 159 x 140 x 171mm (LxWxH) - Bearing Type: UFB bearing (Updraft Floating Balance bearing) - Blade Geometry: 9 red coloured Blades with MVB (Maelström Vortex Booster) Design - RPM: 1200 RPM ± 10% (with PWM: 700-1200 RPM) - RPM with Q.S.A: 900 RPM ± 10% - Max Air Flow: 78.1 CFM (45.1CFM - 78.1 CFM) - Max Air Pressure: 1.21 (0.45 mm H2O – 1.21 mm H2O) - Acoustical Noise: 19 dBA - 5 Year Warranty

More links for "PH-TC14PE CPU Cooler - Orange"


Customer review "Phanteks PH-TC14PE CPU Cooler - Orange"

Average customer rating
Star Rating
(from 4 customer reviews)
Probably the quietest cooler out there and perfect for the recording studio....
ok got this cooler with the rest of my x79 setup, ok this wasnt too hard to fit at...
andy macadandy
I don't have one of these coolers, but I just wanted to say the other reviewer mentions...
All Time (4)
25% (1)
50% (2)
25% (1)
0% (0)
0% (0)

quiet and large

Probably the quietest cooler out there and perfect for the recording studio.

Max temp (CPUID) on Intel Core i7-4790K @ 4.00GHz is 80C would have liked lower.

Biggest drawback is it's size as it covers ram A channel on Z97X-Gaming 7. this restricts you to low profile memory.

allan 2012-05-02

the size

ok got this cooler with the rest of my x79 setup, ok this wasnt too hard to fit at first like what has been posted, because i had a full new setup so naturally the m/b is already out so i fitted the fan before installing the m/b, but this thing is so damn large, i wanted the fans to blow from the front of the case to the back of the case, but with the cooler this way around, i found i could not fit my graphics card into the top pcie slot, so by this time the m/b was installed, so i had to turn the cooler around but couldnt be bothered taking m/b out, was a bit fiddly but got there in the end, on the up side i have my cpu @4.5 and my idle tems are 22-32 according to core temp, load temps are low 70's, all in all a very good cooler.

andy macadandy 2012-04-09

Phanteks PH-TC14PE CPU Cooler - Orange

I don't have one of these coolers, but I just wanted to say the other reviewer mentions the difficulty of fitting, IE needed to remove the mobo and all that. I think, unfortunately, that this is standard fare with today

Paul Thickett 2012-02-12

Very Difficult

This cooler is very difficult to fit, you have to bolt a backing plate on to the motherboard first. You have to take your mobo out to achieve this!

Once the back plate has been fitted and your mobo is back in place you can try to fit the heat sync, you have to try to center the heat sync and line up 2 screws over the top of the back plate and screw down on to them, the screws are difficult to reach as they are in the centre of the HSF.

The fans are noisy and when the two are working blowing in the same direction you get a tiny humming noise from then, this is very annoying.

Write a review
Reviews will be active after verification


* Required field

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.


    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here