+44 (0)1782 44 44 55
Shift-X Mini-ITX Black Case + Seasonic Focus Plus 550W 80+ Platinum PSU BundleEnjoy the pairing of these enthusiast grade products at a huge discount for the Black Friday sale!
The Enthoo Evolv Shift X combines the striking design of the Evolv series with new, innovative features to make for a truly eye-catching Mini-ITX case. The Evolv Shift X has a very small footprint, however due to its innovative layout it is capable of hosting a range of high-end gaming hardware components. The Shift X can also be placed horizontally, cutting an attractive figure in any living room with its intelligent blend of aluminium and tempered-glass surfaces. In spite of being designated as a Mini-ITX case, the Enthoo Evolv Shift X is capable of holding a large dual-radiator as well as graphics up to 50 cm in length.
The Features of the Phanteks Enthoo Evolv Shift X Mini-ITX Case
- Striking aluminium and tempered-glass design
- Perfect case for stylish living room PCs
- Space for a 280 mm radiator
- Graphics cards up to 52,9 cm in length
- GPU bracket can be rotated
- Supports a wide range of RGB-LED controllers
- Can be set vertically or horizontally
Premium PC Case for the Living Room
The Enthoo Evolv Shift X offers space for gaming graphics cards up to 52.9 cm in length and a 280 mm radiator for a high-performance AiO CPU cooler. The case has been designed from the ground up to be the perfect silent, watercooled system for use in the living room. With its blend of tempered glass and aluminium, the case blends in perfectly amidst any designer living area and can be set vertically in a manner similar top Hi-Fi speakers or set horizontally like a games console.
The graphics card is mounted with the accompanying PCIe x16 riser card in such a way as to allow either the backplate or the GPU cooler to be visible from the exterior. The Mini-ITX motherboard is built in parallel to the graphics card with the back panel facing upwards. The ports on the I/O panel as well as the graphics card are hidden beneath a covering which allows all connected cables to be redirected through a gap in the back.
Mini-ITX Case for Custom Watercooling
The 280 mm radiator mentioned above can be installed to the fore of the Enthoo Evolv Shift X underneath the motherboard and the graphics card. An SFX(-L) power supply can be installed in the back and the free space between the PSU and the front can be used for holding the reservoir of a custom watercooling setup. As the RGB lighting is visible from both sides, coloured liquid coolants are ideal for this case.
In order for your hardware of choice to be shown in the best possible light, with the help of the RGB-LEDs, the case enables LED lighting to be controlled via ASUS' Aura Sync, RGB Fusion from Gigabyte, as well as MSI's Mystic Light Sync - and all at the push of a button. A bracket for pumps as well as PSU shrouds also come with this Mini-ITX case.
Cooling, Storage & Additional Features
Two 140 mm fans come pre-installed from the factory in the Evolv Shift X and while the fan in the base of the tower pulls air in, the fans at motherboard height push the warm air up and out of the case. Additionally the warm air produced by the hardware is also removed via the vents built into the roof of the case.
Up to two 3,5" hard drives can be installed in the front in place of a radiator and both accompanying SSD brackets can similarly be attached in the front. The 2,5" SSD brackets are somewhat better installed at the back, allowing the case to hold a further radiator. The base plate on which the SSD brackets are installed (no tools necessary) can be removed to further simplify hardware installation.
The I/O panel of the Mini-ITX case is located to the left side on the rear of the case and offers two USB 3.0 ports for gaming peripherals or external USB hard drives as well as USB sticks. In typical Phanteks fashion there are several points with Velcro ties to allow improved cable management as well as rubberised cable guides in the case. Dust filters as well as air vents in the aluminium casing are equipped with dust filters to offer the system further protection.
- Dimensions: 170 x 650 x 274 mm (W x H x D)
- Material: Steel, aluminium, tempered glass
- Colour: Black
- Form Factor: Mini-ITX
- Total Possible Fans:
3x 140/120 mm (upper)
1x 140/120 mm (lower)
- Pre-installed Fans:
1× 140 mm (upper)
1× 140 mm (lower)
- Radiator Mountings (depending on HDD and/or fan slots):
1x max. 280 mm (upper)
1x max. 120 mm (lower)
- Filter: Front, back, bottom (removable)
- Drive Trays:
2x 3.5" (internal, if no radiator is installed)
4x 2.5" (internal, 2 SSD brackets available, additional brackets can be acquired separately)
- Power Supply: 1x SFX or SFX-L (optional), ATX up to 160mm
- Expansion Slots: 2
- I/O Panel:
2x USB 3.0
1x RGB Switch
- Maximum Graphics Card Length: 529 mm
- Maximum CPU Cooler Height: 82 mm
- Guarantee: 5 Years
Focus Plus 550W Key Features80 Plus Platinum
The higher the level of efficiency of the power supply, the less power gets wasted in the form of excess heat . The 80 PLUS® Platinum certification guarantees greater than 90 %, 92 % and 89 % efficiency at 20 %, 50 % and 100 % operating loads, respectively. The Seasonic Platinum Series represents the highest level of technology and efficiency achievement of Sea Sonic during its 40 years of commitment to engineering excellence.
This ultra-high power density, small footprint (140 mm depth) power supply is an ideal choice for all, especially compact ATX cases.
Fluid Dynamic Fan Bearing
High performance Fluid Dynamic Bearing (FDB) fans are designed to take advantage of the impact absorbance effects of oil. They are extremely reliable and generate considerably less operating noise and heat than ball bearing fans. The lubrication of the bearing surface reduces friction and vibration and therefore lowers overall power consumption. Due to the effortless, quieter rotations and its robust construction, this reliable fan technology also greatly increases the lifespan of the fan.
How it works
When the fan shaft rotates, high pressure oil drifts along the grooves of the bearing sleeve to generate a thin layer of lubrication between the bearing faces. As the speed increases, so does dynamic oil pressure and the shaft is lifted from the bearing to create smooth, effortless rotations. The herringbone shape of the groves helps to efficiently channel the lubricant and avert leakage.
Hybrid Silent fan Control
The industry’s first, Seasonic patented, advanced three-phased thermal control achieves optimal between silence and cooling. This Hybrid Silent Fan Control functions in three operational stages: Fanless Mode, Silent Mode, and Cooling Mode.
Benefits of this design
- Reduced noise without increase in temperature;
- Extended fan life due to the reduced number of fan rotations;
- Optimized heat dissipation at all times;
- Unsurpassed silent performance in Fanless Mode.
Additionally, there is a switch at the back of the power supply which allows users to customize their cooling needs by selecting between the Seasonic S2FC (fan control without Fanless Mode) and the S3FC (fan control including Fanless Mode).
Tight Voltage Regulation
Seasonic’s advanced design is to improve load regulation which reduces voltage variations to provide smooth and stable operations.
Cable-free Connection Design
Seasonic’s engineers have implemented a new design feature, where instead of cables; the back panel and the PCB (Printed Circuit Board) are connected by a copper plate. This breakthrough solution not only lowers the chance of production errors during manual insertion but it also improves output power quality.
10 Years Warranty
Our commitment to superior Seasonic quality.
Specification- 80PLUS: Platinum
- Form Factor: Intel ATX 12 V
- Dimensions: 150 mm (W) x 140 mm (L) x 86 mm (H)
- Fan Size: 120 mm
- Fan Control: Hybrid Silent fan Control
- Fan Bearing: Fluid Dynamic Bearing
- Life Expectancy: 70,000 hours at 40 °C, 15 % - 65 % RH
- Modularity: Fully Modular
- Cable type: Flat black cables
- Operating Temperature: 0 - 50 °C
- MTBF @ 25 °C, excl. fan: 100,000 hours
- AC Input: Full Range
- Protection: OPP, OVP, UVP, OCP, OTP, SCP
- Safety and EMC: cULus, TUV, CB, CCC, BSMI, EAC, RCM
- Environmental Compliance: Energy Star, RoHS, WEEE, ErP Lot 6, REACH
Connectors- 1 x 20+4-Pin ATX12V/EPS12V
- 1 x 4+4-Pin ATX12V/EPS12V
- 2 x 6+2-Pin-PCIe
- 6 x SATA
- 3 x 4-Pin-Molex
- 1 x Floppy
- Warranty: 10 Years