+44 (0)1782 44 44 55
Shift-X Mini-ITX Gunmetal Case + be quiet! SFX-L 600W 80+ Gold PSU BundleEnjoy the pairing of these enthusiast grade products at a huge discount for the Easter Sale!
The Enthoo Evolv Shift X combines the striking design of the Evolv series with new, innovative features to make for a truly eye-catching Mini-ITX case. The Evolv Shift X has a very small footprint, however due to its innovative layout it is capable of hosting a range of high-end gaming hardware components. The Shift X can also be placed horizontally, cutting an attractive figure in any living room with its intelligent blend of aluminium and tempered-glass surfaces. In spite of being designated as a Mini-ITX case, the Enthoo Evolv Shift X is capable of holding a large dual-radiator as well as graphics up to 50 cm in length.
The Features of the Phanteks Enthoo Evolv Shift X Mini-ITX Case
- Striking aluminium and tempered-glass design
- Perfect case for stylish living room PCs
- Space for a 280 mm radiator
- Graphics cards up to 52,9 cm in length
- GPU bracket can be rotated
- Supports a wide range of RGB-LED controllers
- Can be set vertically or horizontally
Premium PC Case for the Living Room
The Enthoo Evolv Shift X offers space for gaming graphics cards up to 52.9 cm in length and a 280 mm radiator for a high-performance AiO CPU cooler. The case has been designed from the ground up to be the perfect silent, watercooled system for use in the living room. With its blend of tempered glass and aluminium, the case blends in perfectly amidst any designer living area and can be set vertically in a manner similar top Hi-Fi speakers or set horizontally like a games console.
The graphics card is mounted with the accompanying PCIe x16 riser card in such a way as to allow either the backplate or the GPU cooler to be visible from the exterior. The Mini-ITX motherboard is built in parallel to the graphics card with the back panel facing upwards. The ports on the I/O panel as well as the graphics card are hidden beneath a covering which allows all connected cables to be redirected through a gap in the back.
Mini-ITX Case for Custom Watercooling
The 280 mm radiator mentioned above can be installed to the fore of the Enthoo Evolv Shift X underneath the motherboard and the graphics card. An SFX(-L) power supply can be installed in the back and the free space between the PSU and the front can be used for holding the reservoir of a custom watercooling setup. As the RGB lighting is visible from both sides, coloured liquid coolants are ideal for this case.
In order for your hardware of choice to be shown in the best possible light, with the help of the RGB-LEDs, the case enables LED lighting to be controlled via ASUS' Aura Sync, RGB Fusion from Gigabyte, as well as MSI's Mystic Light Sync - and all at the push of a button. A bracket for pumps as well as PSU shrouds also come with this Mini-ITX case.
Cooling, Storage & Additional Features
Two 140 mm fans come pre-installed from the factory in the Evolv Shift X and while the fan in the base of the tower pulls air in, the fans at motherboard height push the warm air up and out of the case. Additionally the warm air produced by the hardware is also removed via the vents built into the roof of the case.
Up to two 3,5" hard drives can be installed in the front in place of a radiator and both accompanying SSD brackets can similarly be attached in the front. The 2,5" SSD brackets are somewhat better installed at the back, allowing the case to hold a further radiator. The base plate on which the SSD brackets are installed (no tools necessary) can be removed to further simplify hardware installation.
The I/O panel of the Mini-ITX case is located to the left side on the rear of the case and offers two USB 3.0 ports for gaming peripherals or external USB hard drives as well as USB sticks. In typical Phanteks fashion there are several points with Velcro ties to allow improved cable management as well as rubberised cable guides in the case. Dust filters as well as air vents in the aluminium casing are equipped with dust filters to offer the system further protection.
- Dimensions: 170 x 650 x 274 mm (W x H x D)
- Material: Steel, aluminium, tempered glass
- Colour: Gunmetal Grey
- Form Factor: Mini-ITX
- Total Possible Fans:
3x 140/120 mm (upper)
1x 140/120 mm (lower)
- Pre-installed Fans:
1× 140 mm (upper)
1× 140 mm (lower)
- Radiator Mountings (depending on HDD and/or fan slots):
1x max. 280 mm (upper)
1x max. 120 mm (lower)
- Filter: Front, back, bottom (removable)
- Drive Trays:
2x 3.5" (internal, if no radiator is installed)
4x 2.5" (internal, 2 SSD brackets available, additional brackets can be acquired separately)
- Power Supply: 1x SFX or SFX-L (optional), ATX up to 160mm
- Expansion Slots: 2
- I/O Panel:
2x USB 3.0
1x RGB Switch
- Maximum Graphics Card Length: 529 mm
- Maximum CPU Cooler Height: 82 mm
- Guarantee: 5 Years
The be quiet! SFX-L Power 80 Plus Gold Power Supply at a Glance:
- Compact SFX-L form factor
- 600 Watt total output
- Powerful 50 A single rail
- 80 Plus Gold certification
- Quiet 120 mm fan
- Fully modular cable management
- 1x 20+4-Pin / 1x 4+4-Pin / 4x 6+2-Pin / 6x SATA / 3x 4-Pin Molex
The Perfect Combination: SFX-L Form FactorThe SFX-L Power from be quiet! employs the compact SFX-L form factor which eliminates one of the disadvantages of the classic SFX format by slightly increasing the length of the PSU. This adjustment means that this compact PSU can be fitted with a larger - and quieter - 120 mm fan instead of an 80 mm fan which is often louder. The result is a powerful SFX-L power supply with an enormously high 600 Watt continuous output and a quiet fan that adjusts itself in accordance with the load placed upon the PSU.
The SFX-L format of this power supply makes it perfect for smaller cases, but that hasn't stopped be quiet! from cramming in a huge range of connectivity options as well as offering a lot of performance in a very small amount of space. Due to the 12,5 cm however, we do recommend that you check the compatibility of your case beforehand. The PSU also comes with a replacement cover to allow it to be mounted in ATX cases.
Fully Modular Cable Management & 80Plus Gold EfficiencyThe mounting of the power supply in small cases is particularly easy thanks to the clever cable management and its modularity, not to mention the removable ribbon cables. The extremely high power efficiency of, on average, 86,5 % - 89,5 %, means that it earns the sought after 80Plus Gold certification. Another advantage of this is the reduction in heat produced during operation, and as a result less heat is dissipated into the case and surrounding components.
Instead of a split 12 V line, this version utilises a powerful 50 A single rail along with a raft of electrical protection features. The individually removable connections also demonstrate the capability of this sturdy PSU: In addition to 20+4-pin- and 4+4-pin connectors, there are even four 6+2-pin PCI-Express connections. Six SATA connectors and three 4-pin Molex connectors allow for plenty of options when it comes to installing peripheral devices like HDDs and DVD burners.
- Dimensions: 130 x 63,5 x 125 mm (W x H x D)
- Fan: 120 mm
- Efficiency: min. 90/87/87 % at 50/20/100 % load (115V, efficiency on 230 Volt European lines), incl. 80 Plus Gold certification
- Active PFC
- Form Factor: SFX-L
- Operating Life: 100.000 h
- Noise: 9,9 / 14,5 / 28,5 dB(A) @ 20 / 50 / 100 % load
- Performance: 600 W
+3.3V: 22 A
+5V: 22 A
3.3V+5V: 105 W
+12V: 50 A (600 W)
-12V: 0.3 A (3,6 W)
5VSB: 3 A (15 W)
3x 4-Pin Molex