+44 (0)1782 44 44 55
Nano-G 14 PWM Black Silent Edition case Fan ( 140x140x25mm )Phobya's latest marvel of cooling Technology!
A fan of both Silent lovers and friends of the performance-optimized system addresses is an absolute novelty in the cooler segment. But this split and still have more talent that fans of other pale with fear, "Fear it!
The consortium of manufacturers' Phobya "it has achieved through optimum alignment of the blades that increased air flow does not necessarily lead to higher noise levels. The rotor blades are curved in combination with the wedge-shaped alignment of the camp to show the context, the future starts here! The camp, which was equipped with the latest Nano Technology combines sash and frame to a minimum point, the drive through coils, ensures that this is almost noiseless, silent fans know what really appreciated. By increasing the speed, here was an air flow rate reached it's so rare!
At a speed of 1100rpm and the latest fan is audible. Therefore, this fan has been designed so that even he has to make do with less tension good. For a start voltage range from 7-12V, this fan will be quieter than a gnat, yet the system is still held by a strong air current is very cool! The scope of supply for the reactors of the same speed, even included a matching cord. This reduces the voltage at 7 volts, depending on taste. All cables are black gesleevet, demonstrating the appearance of the fan.
The look is another point which takes in addition to functionality, a high weighting. The transparent black frame and blades is accompanied by his Schlichtig convinced by the blue LEDs again gently. Decorated like a grand piano in the living room, this is a whole new eye candy in the system where each user can say to himself: This fan is a good choice!
To clean the fan, the entire rotor can, by slightly, from the frame and engine are removed. To clean is carried out smoothly. Just hold it under running water and rinse the dust. After a short drying period, the cooler by gently squeezing in the original state are returned to the fan and you can start work again.
- Dimensions: 140 x 140 x 25mm
- Colors: transparent black frame, transparent black blades, blue LEDs
- Weight: 150g
- Rated Voltage: 12V
- Start Voltage: 7 Volts
- Power consumption: 0.15 A
- Rated speed: 600-1100rpm (+ / -10%)
- Airflow: max. 100m ³ / h / 58.86 CFM
- Volume: 10-24 dB / A
- MTBF (25 ° C): 100000 hrs
- Connector: PWM / 4 pin fan connector
- Max Static Pressure: 1.85mm-H2O