Top Sellers

EreBoss High Performance CPU Cooler

  • Socket Compatibility: 775 / 1150 / 1155 / 1156 / 1151/ 1366 / 2011 / AM2 / AM2+ / AM3 / FM1 / FM2


3 In stock


Stock Code: HS-000-RT

EAN: 4715109920031

MPN: 0P105250

Manufacturer: Raijintek


Product information: EreBoss High Performance CPU Cooler

EreBoss, is a giant heat-sink with world’s top slim type 14013 fan, is an extremely good value cooler. “Designed in Germany”, Ereboss is manufactured to provide users an awesome performance but at a great price point. The Ereboss fan is a slimline 140mm fan at 13mm thickness, but provides outstanding performance.

Key Features

- Nickel copper base, efficient 6mm Heat-pipe*6 & ultra large dissipating area fin
- Super Slim type 14013 PWM fan - 13mm height; Low noise & outstanding air flow as well pressure
- Multiple mounting kits for a wide range of sockets
- Patent designed holes on fins to provide excellent air flow and cooling efficiency
- Dual fans installation option and anti-vibration rubber attached.


- Dimension: 140(W) x 110.5(D) x 160(H) mm
- Base Material: Nickel Copper
- Fin Material: Aluminum Alloy; Solder-free fins assembly
- Heat-pipe:6pcs.
- Fan Dimension: 140(W) x 150(H) x 13(D) mm
- Voltage Rating 12V
- Starting Voltage 7V
- Speed: 1100 ~ 1650 R.P.M.
- Bearing Type: Sleeve Bearing
- Air Flow: 66.65 CFM (Max.)
- Air Pressure: 1.72 mmH2O (Max.)
- Life Expectance: 40,000 hrs
- Noise Level: 28 dBA
- Connector: 4 pin with PWM
- Weight: 808g (Heat Sink

**For an AM4 bracket please visit the manufacturer support page with proof of purchase of the cooler and proof of purchase for the Ryzen CPU. We will try our best to get some brackets but you should contact the manufacturer first. **

More links for "EreBoss High Performance CPU Cooler"


Customer review "Raijintek EreBoss High Performance CPU Cooler"

Average customer rating
Star Rating
(from 4 customer reviews)
I have been using this Ereboss to cool my FX8350 @ 4.6Ghz. It can be a fiddle to...
Got this to go with a i7 4790k ,Asus Z97 K , only reason i got it as it was by far the...
Have no faults with the cooling performance of this cooler, the twin fan setup really...
All Time (4)
50% (2)
50% (2)
0% (0)
0% (0)
0% (0)

Cooling my overclocked FX 8350

I have been using this Ereboss to cool my FX8350 @ 4.6Ghz. It can be a fiddle to install but once fitted I can not fault it. It runs very quiet, almost silent in fact. The slim fan does an amazing job considering it's size. Even overclocked my temps never went above 55'C even while gaming for hours in the middle of summer. For the price this is by far and away the best cooler. Even up to


Big chunk of alluminium

Got this to go with a i7 4790k ,Asus Z97 K , only reason i got it as it was by far the cheapest cooler in the Extreme Performance Air Cooling category here.
Bought it first then started reading the reviews about it (i know should of done some research first) most of the reviews where saying the fan was loud at full speed and the problem with it blocking ram slots , so when it arrived i was all ready to send it back for a refund.
But decided to give it a go and am i glad i gave it a chance and kept it,
Installation was easy enough only problem is you need a screwdriver that can fit in a 1cm hole to tighten one of the screws , needs to have 15cm long shaft.
Mounting the fan was a bit tricky as it seems the rubber mounts are a bit off (get the top ones in the bottom ones are slightly off) , but with a bit of jiggery got it installed.
Moved the ram to slots A2B2 , but you could use all the slots no problem theres about 1mm to spare to the top of my Kingston Hyper x Fury.
Room temp is 17c , Booted her up and after a few mins at idle got 23c (was getting 31c with Zalman CNPS10X performa).
30 mins of Intel extreme tuning utility and the max was 59c (69c on the Zalman).
Virtually silent at idle and not much louder at full speed.


erebos twin fan review

Have no faults with the cooling performance of this cooler, the twin fan setup really only dropped another 2 or 3 degrees c on top of the initial monster drop, system idles around 32 degrees C, and have yet to see it rise over 48 under extended max load stress tests. This isnt the most straight forward cooler to install with the "bar" system. I found it easier to put the fans on last. screw 1 side in slightly and line the other side up while holding the plate off the cpu, once you have both screws in then screw each side down a little bit at a time until you obviously the cooler is secure. This would have received 5 stars but loses 1 star for fan noise level, its not the noise of the air but there must be a design flaw in the fans as they tend to rattle from the main bearing and trust me it can get quite annoying, a simple push on it instantly stops it but it will come back, I`m thinking of weighting the centre of the fan slightly to prevent this. All in all a great performa!
nce cooler for the price, fan noise can be annoying and make sure you have some spare thermal paste incase you dont set it down correctly first time round.



Got one delivered yesterday have to say wow its the biggest heatsink ave seen very easy to fit only dissapointed with the fan as it looked to big to fit had to adjust it to make it fit in my bitfenix case other than that the temps have dropped 30 degrees from stock cooler. Gave four stars for fan being just a bit to big.

Write a review
Reviews will be active after verification


* Required field

Awards & Media Coverage

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.


    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here