Scythe
Gentle Typhoon 120mm 1850 RPM - 3 Pin

  • The GentleTyphoon achieves high airflow volume and low noise with the newly designed impeller
  • enabling silent cooling of the latest devices which run very hot.

Stock Code: FG-030-SY

EAN: 4571225042459

MPN: D1225C12B5AP-15

Manufacturer: Scythe

 
 

Product information: Gentle Typhoon 120mm 1850 RPM - 3 Pin

The GentleTyphoon achieves high airflow volume and low noise with the newly designed impeller, enabling silent cooling of the latest devices which run very hot.
The GentleTyphoon has a different type of tone. The fan propeller is designed to reduce the disturbing frequency fan noise to human ears. The newly designed motor and motor support mechanism of the GentleTyphoon uses a double vibration reduction structure. The new support mechanism uses coil dampers to greatly reduce vibration.


- Manufacturered in Japan
- Only 21.0 dB(A) at 1850 RPM
- Weight 200 g
- Dimensions 119 x 119 x 25 mm
- Air volume at full speed (12V), CFM ±10% 58.0
- Noise level at full speed (12V), dB(A) 28.0
- Fan speed at full speed (12V), RPM ±10% 1850
- Bearing Type Double Ball Bearing
- MTBF 100,000 hour at 35°C or 60,000 hours at 60°C
- Accessories 4-pin Molex Adapter, 4x Screws
 

More links for "Gentle Typhoon 120mm 1850 RPM - 3 Pin"

 

Customer review "Scythe Gentle Typhoon 120mm 1850 RPM - 3 Pin"

Average customer rating
Star Rating
(from 8 customer reviews)
 
Great air flow and super low noise. I cant here the fans spinning at all only the air...
Ronan
I bought three of these to replace the older stock fans in my Antec300 case. After...
Steve
Got this to replace the corsair stock fan on my A50 cooler. Temps are roughly the same...
All Time (8)
75% (6)
25% (2)
0% (0)
0% (0)
0% (0)
 
2013-09-07

GREAT

Great air flow and super low noise.
I cant here the fans spinning at all only the air that's produced as it passes through the radiator.
If your looking for low noise and good air flow you cant go much wrong with these fans.
I did find one fan had a bad bearing but I managed to replace the bearings from the fan that came with my 2700k cooler.
Its good to know you can replace the bearing, 2 needles either side of the C clip and it comes right of just be carful you don't loose it.
All and all im very happy with these fans but it has to have 4 stars for the fan that had a loud bearing.

 
Ronan 2012-07-07

Louder than expected

I bought three of these to replace the older stock fans in my Antec300 case. After connecting the front two using the supplied Molex 4-pin to fan cables, I was pretty surprised at how loud they are at full power - not uncomfortable, but definitely disturbing if I had music on low volume.

I have since used a 3-pin fan splitter to connect both via motherboard, and with auto-control they are much, much quieter (60% speed brings them down to almost silent). They shift a great deal of air, so I'm pleased in that regard.

tldr version: make sure you have some kind of fan control (mobo or controller) unless you wear headphones all the time.

 
Steve 2012-05-26

Silent and deadly

Got this to replace the corsair stock fan on my A50 cooler. Temps are roughly the same at idle and under load, maybe shaved 1 degree off which is fine as my 2500k @4.5 never goes above 65 degrees. But I actually had to check to see if it what turning as it was so so quiet. I looked inside while the pc was on and low and behold it was turning. Awesome fan, almost silent.

 
alan 2012-04-16

good fans

i bought these for my rad , running them at 70% there not as noisey and do same job at 70% load ( around 1200rpm) @ full speed there far from silent but i think most of the noise was the air whistling into my case @ full load lol.

For 16 pound fans though i was disapointed not to see braided cables...

 
Nick 2011-10-26

Amazing

Wow swapped my Corsair H70 fans with a pair of these and they knocked 10 degrees of the CPU Temp and silent! well worth it.

 
David 2011-10-19

Much better than stock h70 one's

I have a Corsair H70, and replaced them with a couple of these, the stock Corsair one's are so loud. Put these in and OMG! It's soooooo quiet. Really pleased with my order, OcUk are pure class for having these in stock.

 
Oliver 2011-10-18

Excellent

Recieved 3 of these today for my xspc rs360 rad and i am very impressed. Excellent build quality, very quiet and the amount of air they are shifting is fantastic.

Great fan and will deffinatly buy again.

 
Mark 2011-10-04

Easily the best fans I have ever tried.

I bought 2 of these to go with a H50. Initially, I tried a set of red Bitfenix Spectre. The first thing you notice after unpacking them is how weighty and solid they feel out of the box.

They easily whipped the BitFenix into submission and then some more. At full 1850 rpm you can barely hear them. There is absolutely no need for a fan controller, even though you would think a fan going at 1850 would be a bit on the noisey side.

In terms of performance (and bear in mind this is a single H50) I have a Q9650 running at 1.38 volts that maxes at 60C and pretty much stays that hot for hours. Previous to this, the BitFenix fans would reach 70c in a matter of minutes.

Quite possibly the best fans in terms of performance to noise ratio on the market, and an easy 5 stars.


 
 
Write a review
Reviews will be active after verification

 

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information
    Select Loan Product:
    For more information click here