OcUK
Overclockers UK - 5 Lymedale Cross - Newcastle-under-Lyme - Staffordshire - ST5 9BT - Telephone: 0871 200 5052 *

Akasa AK-FN059 120mm Ultra Quiet Venom Viper Cool Fan - 3/4 Pin

Stock Code: FG-059-AK
Manufacturers Code: AK-FN059
Write a ReviewCustomer Rating:Average rating of 5.0

S-FLOW fan blade design delivers 30% higher airflow. High performance and PWM auto speed control.


10+ in stock for immediate despatch

£9.49 inc VAT
£7.91 ex VAT

Quantity:

You own this product? Write a Review

Filter Reviews

Period

last 2 weeks (0)

last 6 month (2)

all reviews (21)

Reviews

90%(19)

10%(2)

0%(0)

0%(0)

0%(0)

AwesomeI have got 4 of these on my Monsta 240 in push pull, and they shift so much air. They are very load on full boar, but with the Monsta doing better with low speed fans they are a perfect fit. I'm about to order 6 more for my XT45, 360, to cool my gpu. The best 120mm fans I have used to date,and the yellow is a perfect match for my MPower motherboard.26/03/2013

Perfectbought 2 of these while there on offer.Replaced the fans on my h80 with these bad boys and what a differance been able too push it too 4.6ghz on z 3770k 62 degrees on full load and damn quiet too on pwm mode buy em you wont regret it.15/01/2013

Showing Reviews 1 - 21 of 21

Pages: 12    Reviews per Page: 122448allSort by: 
  • Paul26.03.2013 | 18:10

     

    AwesomeI have got 4 of these on my Monsta 240 in push pull, and they shift so much air. They are very load on full boar, but with the Monsta doing better with low speed fans they are a perfect fit. I'm about to order 6 more for my XT45, 360, to cool my gpu. The best 120mm fans I have used to date,and the yellow is a perfect match for my MPower motherboard.182 User found this Review usefullHelpful Review? Yes

  • Gareth15.01.2013 | 13:39

     

    Perfectbought 2 of these while there on offer.Replaced the fans on my h80 with these bad boys and what a differance been able too push it too 4.6ghz on z 3770k 62 degrees on full load and damn quiet too on pwm mode buy em you wont regret it.180 User found this Review usefullHelpful Review? Yes

  • Michal01.08.2010 | 01:36

     

    Solid and nice lookingvery nice fans, using them with Corsair H50, very good performance from around 900 rpm, very quiet, only noise is from rad fins really. Build quality is superb too, i had Noctua fans before but these are better option now. like colour scheme too. 5 stars164 User found this Review usefullHelpful Review? Yes

  • Nuttyprot30.04.2011 | 12:00

     

    Great FanI love this fan. Ordered 1 to replace 1 of the 2 thermaltake frio cooler fans that I broke.
    This fan is so good I am ordering another to replace the other fan on my thermaltake frio.

    Pros:
    Quiet
    Moves nice amount of air
    Keeps my cpu cooler nice and cool
    Looks good
    Pre braided cable

    Cons: Does not come with molex adapter (rearly not an issue tho)164 User found this Review usefullHelpful Review? Yes

  • Dan14.09.2010 | 21:35

     

    Decent FansAt 15 each, they aren't cheap, but are wonderfully quiet and shift some decent air.

    These things cool my H70 rigged i7 920, at 30 idle 45 load and are still whisper quiet.... HDD can be heard over these.

    I bought two, but would happily buy more.162 User found this Review usefullHelpful Review? Yes

  • thingemajib25.09.2010 | 18:41

     

    WindyThey are quite pricey (they're slightly cheaper elsewhere, but im local to OCUK so no shippping costs evens it out.), but they dont half shift some air compared to the stock fans

    Got one shoved in the front of the case and considering another for the rear. At 1100RPM its inaudible over the rest of the system. Even the full 1900 is not particularly loud (its borderline bearable!).

    My only major gripe is that the cable is quite short. I guess these are mostly used as CPU cooler fans, but this one bearly stretched to the motherboard header. I would say 4.5/5, but as its not possible, i give it the full 5*155 User found this Review usefullHelpful Review? Yes

  • JG07.12.2011 | 21:22

     

    Great CoolingMy case didn't have any fans except the CPU cooler and maxed out the CPU ran at 60c. Now with a fan controller , a viper at the rear and a viper on the top of my PC case at 1100 rpm the maxed out CPU temp is 46c.

    If I go to max rpm the temp goes lower still.

    The fans were easy to fit and did not make any real noise at all until running fast. Recommended.152 User found this Review usefullHelpful Review? Yes

  • Sam24.09.2010 | 22:55

     

    AmazingDropped my temps and keeps them stable constantly now at 30-35ish!150 User found this Review usefullHelpful Review? Yes

  • Tom26.08.2011 | 18:18

     

    Awesome!Awesome fans, already got two of these on the coolit alc eco, in push/pull config.

    Ordered another 3 as case fans, shift a load of air. a little noisy at 1900rpm but who cares if your components think its Alaska! Also the air is directed very well, no vibration!

    Awesome fan!150 User found this Review usefullHelpful Review? Yes

  • Edward23.03.2011 | 13:42

     

    Good Apache UpgradeMy set up is:

    Mobo: Asus M4A785TD-V Evo
    CPU: Phenom II X6 1090T (@ 3.8 GHz; 2600 cpu nb; vcore 1.375; nb volts 1.25)
    Sink: Thermolab Baram
    Case: Coolermaster Elite 335
    RAM: 8GB OCZ

    My set up is the fan blowing through the Baram towards the stock exhaust fan back of the case. There is also a 120mm intake fan at the front and a low RPM 92mm side panel intake fan.

    I loaded my CPU using Intel Burn Test v2.50 set to Maximum.

    Apache on the Baram: max 55*C
    Viper on the Baram: max 53*C

    I then swapped out the Coolermaster stock exhaust fan on my case for the Apache. The apache is rated as quieter and with a higher CFM.

    Viper on Baram, Apache on Case: max 52*C

    >From unscientific observation my load volume seems a little higher than it was but nothing much to worry about. My idle volume is the same.

    All in all I am pleased. Not a huge drop but enough to make it worth it and for me to start pushing above 4GHz.149 User found this Review usefullHelpful Review? Yes

  • Kevin03.12.2010 | 18:12

     

    A must for the Corsair H70Drops CPU temp by 4 to 5 degress compared to stock fans on H70 when idle.

    My i7 CPU now idles at 30C when overclocked to 4.0Ghz, 1.375V148 User found this Review usefullHelpful Review? Yes

  • Craig19.08.2011 | 01:05

     

    A little noisier than expectedBought 2 of these to replace a couple of 120mm akasa amber quiet fans as not enough air flow through case. These are an improvement but they are more audible running on std settings. Running them on quiet still gives better airflow and are almost inaudble. Can fault them otherwise.147 User found this Review usefullHelpful Review? Yes

Pages: 12    Reviews per Page: 122448allSort by: 

Write a Review

Copyright 2006 - 2014 | www.overclockers.co.uk | Overclockers UK (Ocuk Ltd) | All rights reserved
Company Number 03869866 | VAT Number GB 747 9639 69
FaderUK MaestroMasterCardPayPalVisaVisa DebitVisa ElectronFader
All on-line orders are placed via our SSL enabled Secure Server.

* Calls from UK landlines cost 10 pence per minute. Call charges from mobiles and international numbers may cost more.
Lines open 8.30am to 5.30pm Monday to Friday and 9.00am to 5.00pm Saturday