Ssupd Meshlicious Mini ITX Case - Tempered Glass - Black - PCIE 3.0

The Meshlicious is the first PC case manufactured by SSUPD (Sunny Side Up Design), a new joint venture between Lian Li and NCASE. As a Small Form Factor (SFF) case, the Meshlicious has an internal capacity of 14.6 litres with dimensions of 245 x 166.4 x 360mm (L x W x H). Despite its size, this gaming PC case has room for 3-slot GPUs that are up to 315mm in length. The three distinctive mesh and singular tempered glass side panels not only enable excellent airflow, but look outstanding with integrated RGB illumination.

The SSUPD Meshlicious at a glance:

• Compact and stylish Mini-ITX case
• Clearance for 315mm GPUs with up to three slots
• PCIe 3.0 Riser card included
• Three mesh and a tempered glass panel for excellent airflow
• Supports standard ATX or SFX PSUs
• Capacity for up to seven 2.5" SSDs

The SSUPD Meshlicious in detail:

The SSUPD Meshlicious has a small footprint and features mesh panels, to create an eye-catching case with plenty of natural airflow. For ease of installation, the exterior panels can be effortlessly popped out, no need for tools.

There are several models of the SSUPD Meshlicious available. Choose between fully mesh or glass editions, and in either black or white. This model is the Tempered Glass Black, with a PCIe 3.0 riser cable included. Three of the exterior panels are mesh, with the fourth in tempered glass to showcase your gaming hardware. It is finished in a classic all-black aesthetic.

Flexible Interior Layout

The SSUPD Meshlicious has a well-thought-out interior. Despite its compact shape, multiple components can be fitted, so you don’t have to compromise on performance. Both the motherboard and PSU are fitted onto the same side of the case, allowing for Mini-ITX and ATX or SFF form factors, respectively. Using an SFF PSU has the advantage of freeing up space for mounting a 2.5" SSD drive alongside the SFF PSU, in addition to the two that can be attached to the base by default.

GPUs can be fitted in either horizontal or vertical orientations, thanks to the included riser cable. In a vertical orientation, there is sufficient clearance for a three-slot 315mm long GPU, allowing any I/O on the graphics card to be accessible via an outlet port on the bottom of the case. To keep cable management tidy, a right-angle HDMI port has been included in the box.

An SFF GPU can be installed horizontally, taking up to three slots and a maximum of 211mm long. This configuration does mean there is no room for a radiator, but a 140mm fan can be installed in the front. It also frees up some space elsewhere in the case, meaning that a 73mm CPU cooler can be fitted to the CPU by moving the motherboard tray, versus a maximum of a 53mm CPU cooler with a vertically mounted GPU.

Additionally, when a GPU is mounted horizontally and an SFF PSU is fitted, a further bracket can be attached to the SSUPD Meshlicious, which has space for two 3.5" drives or four 2.5" drives. The result is a maximum of either two 3.5" drives and three 2.5" drives or seven 2.5" drives can be fitted.

Excellent Cooling and I/O Accessibility

There are several options for cooling. Out of the box, the large mesh panels allow for outstanding airflow, which can be enhanced by installing two 120mm or 140mm fans in the front. Alternatively, up to a full 280mm radiator can be mounted on the front, ideal for AiO coolers.

Maintaining the minimalistic aesthetic, the I/O on top of the case is kept to the bare essentials. There is a single USB Type-C 3.1 Gen 2, a USB 3.0 port, and a power switch. It's also worth noting that unlike most cases in this category, the motherboard is mounted to the SSUPD Meshlicous with I/O ports accessible from the back of the case. As a result, accessing them much is easier compared to when the I/O is on the bottom, and it looks neater than when they’re mounted to the top.

Specification