Swiftech
Apogee GTZ Waterblock - 1366 & 2011 Compatible
- Ultimate performance pushing even the D-Tek Fuzion and EK Supreme to the edge of their performance. Able to cool any chip on the market to the lowest temperatures - This is the new King.
Stock Code: WC-032-SW
EAN: 0877790000769
MPN: GTZ
Manufacturer: Swiftech
Product information: Apogee GTZ Waterblock - 1366 & 2011 Compatible
The Apogee™ GTZ is Swiftech's new flagship water-block. While it shares the same name with its predecessors, it also leaps beyond the GT and GTX performance charts thanks to an entirely new design that pushes and refines both thermal and mechanical specifications to the limits of today's technology. Thermal design of the cooling engine combines the benefits of direct coolant impingement over the CPU area with an entirely new copper base plate design which is primarily characterized by a pin matrix composed of 225 µm (0.009") micro structures. This results in a 20% improvement in thermal resistance compared to the Apogee™ GTX. Mechanical design of the copper base plate is optimized for Intel socket 775, 2011 and 1366 and features a topographically mapped CPU contact area which results in a 75% and up to 300% improvement in TIM joint thermal resistance compared to the Apogee™ GT/GTX series. It should be noted that other types of sockets (AMD socket F, AM2, 940) may also benefit from the enhanced contact area to a lesser extent.More links for "Apogee GTZ Waterblock - 1366 & 2011 Compatible"
Similar products
EK Water Blocks EK-CSQ Extender 8mm G1/4 -...
£1.99*
**B Grade** XSPC D5 Dual Bay Reservoir/Pump...
£50.00*
-46%
**B Grade** EK Water Blocks EK-FC780 GTX Ti...
Was: £59.99 £32.00*
-68%
**B Grade** Koolance HX-CU1402V 30 FPI...
Was: £62.99 £20.00*
-27%
**B Grade** EK Water Blocks EK-DDC X-RES 140...
Was: £29.00 £21.00*
Recently Viewed
Customer review "Swiftech Apogee GTZ Waterblock - 1366 & 2011 Compatible"
i7 1366 CPU block
The Apogee GTZ is designed for the 775 socket but the conversion kit allows fitting to a i7 1366 pin board. The installation was a breeze with the board out of the case. I used this system to replace the CPU block on a Thermaltake Kandalf LCS as they don't provide a 1366 kit. This block works very well with the Kandalf thankfully as I wasn't sure that you could use a different CPU block with the Thermaltake 3/8" thin wall tubing.