+44 (0)1782 44 44 55
Level 20 GT Full Tower Case - Black WindowThe Thermaltake Level 20 GT is a relatively compact Full-Tower case with impressive aesthetics and a few particularly welcome premium features. The entire interior can be easily seen through the hinged tempered glass side panels as well as the panels in the front and cover. In addition, the housing offers a vertical graphics card mounting option as well as extensive options for large radiators as well as pumps and reservoirs for custom water cooling systems.
The Thermaltake Level 20 GT Full-Tower at a Glance:
- Front, roof and side panels in 5 mm thick tempered glass
- Motherboards up to E-ATX form factor
- Includes 1x Riing 14 140 mm fan with blue LED
- Up to 9x 120 mm- or 7x 140 mm fans / 4x 200 mm fans
- Space for three 420 mm radiators as well as pumps & reservoirs
- Modular design with vertical GPU mounting
- I/O Panel with 2x USB 3.0 / 2x USB 2.0 and 1x USB 3.1 Type C
- 7x 3.5" HDD or 10x 2.5" SDD
Hardware Options in the Thermaltake Level 20 GT:A total of eight horizontal PCI slot brackets are available, and the modular case design enables vertical mounting. This means the graphics card can be installed using an optional riser cable (available separately). The transparent glass side panel allows users to enjoy a full and unhindered view of their high-end gaming graphics card as well as making it into a eye-catching feature of the case overall. The spacious case accepts GPUs with lengths of 31- up to 41 cm, if users forfeit the HDD cage. Motherboards up to E-ATX can be installed on the motherboard tray and as for coolers, CPU coolers up to heights of 200 mm are compatible.
The side panels, front and roof are all made from 5 mm thick tempered glass and this means the interior of the case becomes something to show off rather than conceal. The side panels are affixed with hinges to enable the sides to fold out by up to 180° or even removed entirely. The rest of the case uses a combination of silver and black to make for a premium aesthetic. If you do happen to have a high-end power supply, the PSU shroud is removable to enable users to show it off as well. The bottom allows for two 120 mm fans to be installed, this means the PSU can be up to 220 mm long.
Air- and Water Cooling Options:The stylish design of the Thermaltake Level 20 GT Full-Tower aside, Thermaltake puts a lot of emphasis on airflow too. In addition to both of the 200 mm fans pre-installed in the front as well as the 140 mm fan in the rear, the case allows for many more fans to be installed. As such, huge 200 mm fans are also compatible with the roof of the case. Alternatively, the front and roof enable three 120- or 140 mm models to be installed while the bottom of the case can support two 120 mm fans.
For complex custom water cooling systems, the Level 20 GT offers multiple mounting slots for radiators, pumps and reservoirs. The front and the motherboard tray allow for 420- or 360 mm models. Installing RGB fans on the radiator is just one option of many in terms of making the most of your case. 360 mm models will fit comfortably in the roof, while the bottom and rear allow for 240- and 140 mm models respectively. A bracket for pumps is included in the bundle and is installed towards the front of the bottom of the case.
Storage Devices and I/O Panel3.5"- and 2.5" drives can be installed in a variety of locations around the case. Two modular cages for two 3.5"- or 2.5" drives can be attached to the motherboard tray. Storage devices can also be hidden on the rear of the motherboard tray, which has space for up to six 2.5" SSDs or three 3.5"-HDDs to be attached. The I/O panel is divided across two sides and includes the obligatory audio jacks and power/reset buttons with two USB 3.0- and USB 2.0 ports on the right side. A modern USB 3.1 Type C jack is included to finally put an end to the frustrations of old style USB ports. Needless to say the case also comes with dust filters on the roof, front and bottom.
- Dimensions: 294 x 580 x 592 mm (W x H x D)
- Weight: approx. 20.1 kg
- Material: Steel (SPCC), tempered glass (5 mm), plastic
- Colour: Black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- Total possible fans:
3x 120 mm / 3x 140 mm / 2x 200 mm (front)
3x 120 mm / 3x 140 mm / 2x 200 mm (roof)
1x 120 mm or 1x 140 mm (rear)
2x 120 mm (bottom)
1x 140 mm Riing Plus 14 blue LED (rear)
- Radiator Mountings (forfeits fan slots):
1x max. 420 mm (in front of motherboard tray)
1x max. 360 mm (roof)
1x max. 140 mm (rear)
1x max. 240 mm (bottom)
- Filter: Front, bottom, roof (removable)
- Drive bays:
7x 3.5" or 10x 2.5" (internal; HDD case or behind the MB tray)
- PSU: 1x Standard ATX (optional)
- Expansion slots: 8
- I/O Panel:
1x USB 3.1 Type C
2x USB 3.0
2x USB 2.0
1x Audio In/Out
- Maximum GPU length: 310 mm (HDD cage), 410 mm (without HDD cage)
- Maximum PSU length: 220 mm (without fans)
- Maximum CPU cooler height: 200 mm