View 31 ARGB Mid-Tower - Black Tempered Glass
The View 31 ARGB Mid-Tower from Thermaltake knows how to please with a front made of tinted acrylic and the two side panels made of tempered glass. Two vertical PCI slot covers allow a graphics card to be installed vertically allowing the often impressive cooler design of the GPU to be on display. The icing on the cake is the support for custom water cooling, which makes the View 31 a real eye-catcher.
- Tempered Glass Side Panels
- Tinted Acrylic Glass Front Panel
- Three pre-installed ARGB fans
- Vertical GPU Mounting
- Supports GPU's up to 420mm in Length
- Space for 360mm Radiators in the Front & Top
Thermaltake View 31 ARGB: Modular design & high functionality
Thermaltake came up with something special for the installation of the graphics card. In addition to eight horizontal PCI slot panels, the case has two modular, vertical PCI panels. Up to a maximum of 420mm long graphics cards can either be installed as usual with the GPU cooler down, or vertically, with the graphics card cooler facing the window. This allows the high-end gaming graphics card to be showcased impressively.
In addition to the impressive design, Thermaltake has also placed great emphasis on functionality in the View 31. A 360mm or 280mm radiator can be placed in the front and the top, while pumps and reservoirs can be attached to the floor or to the motherboard tray. The floor, like the back, can also accommodate a 120mm or 140mm radiator. Any custom water cooling loop you design can then be admired through the two Tempered Glass Side Panels.
If you prefer to tame your gaming hardware with classic air cooling, you can use a CPU cooler up to a height of 180mm and install two 200mm fans in the Top of the chassis. The front accommodates three 120, two 140mm or one 200mm fan(s), while a 120mm or 140mm fan can be attached to the bottom and rear. There are three 140mm fans with digitally addressable RGB LED lighting pre-installed and illuminate the hardware in 16.8 million colours.
Three 2.5" or 3.5" storage drives can either be installed in a drive cage in front of the power supply or behind the motherboard tray, whereby the SSDs/HDDs are screwed onto the drive bays, so that both options are not possible at the same time. In addition to the obligatory audio connections and power / reset buttons, the I/O panel on the front panel has two USB 2.0 and 3.0 ports each. There is also a button for operating the RGB LED lighting.
Note: The PCIe riser cable required for vertical mounting of the graphics card is not included in the scope of delivery and must be ordered separately. The graphics card should not be larger than two slots for vertical installation.
Dimensions (W x H x D) - 250 x 497 x 511mm
Weight - 9.9 kg
Material - Steel (SPCC), Plastic, Tempered Glass
Colour - Black
Motherboard Form Factor - ATX, Micro-ATX, Mini-ITX
Fan Support - 3x 120 / 2x 140 / 1x 200mm (front)
3x 120/140 / 2x 200 mm (top)
2x 120/140 mm (bottom)
1x 120/140 mm (rear)
Pre-Installed Fans - 2x 140 mm (front, ARGB fan)
1x 140 mm (rear, ARGB fan)
Radiator mountings (without fan slots) - 1x max. 360/280mm (front)
1x max. 360/280 mm (top)
1x max. 120/140 mm (bottom)
1x max. 120/140 mm (rear)
Removable Dust Filters - front, bottom, top
Drive bays - 3x 2.5" / 3.5" (internal; HDD cage or behind the MB tray)
PSU Form Factor - 1x standard ATX
Expansion slots - 8 + 2
I/O panel - 2x USB 3.0
2x USB 2.0
2x 3.5 mm jack (audio in/out)
GPU Clearance - 420mm (without HDD cage) / 278mm (with HDD cage)
PSU Clearance: 180mm (with a fan in the floor) / 220mm (without fan in the floor)
CPU Cooler Height - 180mm
More links for "View 31 ARGB Mid-Tower - Black Tempered Glass"