Alpenföhn
Two Fan Bundle - Alpenfohn 140mm Wing Boost 2 Plus PWM Fan - Blue
- 2 x 120mm Fan
- Black and Blue
- 18.2 dB
- 500 - 1500 rpm
- PWM Control
Stock Code: FG-026-AL
EAN: 0000000000000
MPN: FG-026-AL
Manufacturer: Alpenföhn
Supported by the biggest tech community forums.overclockers.co.ukDirect Service Hotline
+44 (0)1782 44 44 55
+44 (0)1782 44 44 55
Product information:
The first generation of WingBoost fans already proved it´s exellent performance in various reviews.
With the new aerodynamically improved wing geometry we could not only increase the airflow
but as well inprove the static pressure at lower noise.
WB2-Technology
Many users ask themselves…what are WingBoost´s? WingBoost´s are ridges on the
impeller that guide the air on the air-inlet side of the impeller. Using the WingBoost 2
technology air turbulences are reduced wich leads to a lower noise level at full speed.
S-Shape geometry
With the improved S-Shape geometry we could reach a higher static pressure compared
to conventional designs.
HD-bearing:
The new developed HD Bearing (Hydraulic Bearing) reduces friction noises to a minimum and thus enables to a quiet operation.
Plus Funktion:
The new WingBoost 2 is equipped with a "plus-function". That means that a Y split cable has been attached to the PWM connector for a second fan. Thanks to this split cable it is possible to control additional PWM fan
with the same PWM connector on the motherboard instead of using a cable adapter or a 3pin connection.
Specifications:
- Dimensions: 140 x 25 mm (W x H x D)
- Dimensions: 166g
- Material: plastic, rubber
- Colour: Black, Blue
- Volume: max. 18.2 dB (A)
- Speed: 500 - 1,500 r / min
- Air flow: max. 106 m³ / h
- Voltage: 12 V
- Connector: 4-pin PWM (with Y-switch)
Accessories:
- 2x Cable 4-pin to 3-pin (no PWM)
- 2x Adapter 4-pin PWM-to-7-volt Molex
- 2x Adapter 1x 4-pin PWM-to-5-volt Molex
- 8x Gummipins for decoupled housing mounting
Two Fan Bundle - Alpenfohn 140mm Wing Boost 2 Plus PWM Fan - Blue
Alpenföhn WingBoost2The first generation of WingBoost fans already proved it´s exellent performance in various reviews.
With the new aerodynamically improved wing geometry we could not only increase the airflow
but as well inprove the static pressure at lower noise.
WB2-Technology
Many users ask themselves…what are WingBoost´s? WingBoost´s are ridges on the
impeller that guide the air on the air-inlet side of the impeller. Using the WingBoost 2
technology air turbulences are reduced wich leads to a lower noise level at full speed.
S-Shape geometry
With the improved S-Shape geometry we could reach a higher static pressure compared
to conventional designs.
HD-bearing:
The new developed HD Bearing (Hydraulic Bearing) reduces friction noises to a minimum and thus enables to a quiet operation.
Plus Funktion:
The new WingBoost 2 is equipped with a "plus-function". That means that a Y split cable has been attached to the PWM connector for a second fan. Thanks to this split cable it is possible to control additional PWM fan
with the same PWM connector on the motherboard instead of using a cable adapter or a 3pin connection.
Specifications:
- Dimensions: 140 x 25 mm (W x H x D)
- Dimensions: 166g
- Material: plastic, rubber
- Colour: Black, Blue
- Volume: max. 18.2 dB (A)
- Speed: 500 - 1,500 r / min
- Air flow: max. 106 m³ / h
- Voltage: 12 V
- Connector: 4-pin PWM (with Y-switch)
Accessories:
- 2x Cable 4-pin to 3-pin (no PWM)
- 2x Adapter 4-pin PWM-to-7-volt Molex
- 2x Adapter 1x 4-pin PWM-to-5-volt Molex
- 8x Gummipins for decoupled housing mounting
More links for "Two Fan Bundle - Alpenfohn 140mm Wing Boost 2 Plus PWM Fan - Blue"
Recently Viewed
Customer review
No Review Yet
This is your chance!
Be the first to review this product
Write a review