Product information: Complete Premium Edition - Intel (Socket 478) White/BlueGet the speed of tomorrow today! The NEW generation VapoChill is the ultimate CPU overclocking system available on the market. By cooling Intel and AMD CPUs to subzero temperature it is possible to reach sky high frequencies up to 60% above standard CPU performance. The VapoChill premium edition cools down to -30 °C / -22 °F and holds a remarkable -20 °C / -4 °F on the evaporator under 100 % CPU load. The VapoChill system supports almost all Intel and AMD CPU-based motherboards and gives the user an unlimited versatility in choice of hardware. Please note - the system does not include PSU. A complete VapoChill premium edition system includes :-
- White design case with blue display window
- VapoChill Cooling unit removing up to 160 W
- High-tech software-based ChillControl (Electronic control unit)
- CPU-kit supporting Intel P4 Socket 478 CPUs
Read the latest reviews of the NEW generation VapoChill !!<here>!!.
!!<>!!Important Information!!<>!! - VapoChill systems are for advanced users only. Do not buy this system unless you agree with the following conditions and the technical support/returns procedure.
!!<>!!Power Supply!!<>!! - In order for the cooling system to work properly, the power supply used should meet the below minimum requirements. The peak current is only required during the compressors start-up procedure. In order for the compressor to work continuously, the PSU must under no circumstances go below 9.6 V - even for only a very short time. Your PSU must meet the these power requirements. Start-up - Cut-in voltage 10.9 V, Peak current @ 12 (50 ms): 12 A +/- 1 A, Peak current @ 10 (50 ms): 14 A +/- 1 A. Continuous - Cut-out voltage: 9.6 V, Current @ 12 V and 100 W heat load: 6.6 A.
!!<>!!CPU & Motherboard Used in VapoChill!!<>!! - As the CPU and motherboard will be operating outside the specification intended by the respective manufacturers, all warranties for CPUs and motherboards purchased from Overclockers UK and used in VapoChill units shall be rendered void.
!!<>!!Technical Support/Returns!!<>!! - All technical support and returms issues will be handled by the manufacturer's of VapoChill - Asetek Inc, Saltumvej 27, DK-9700 Broenderslev, Denmark. Phone +45 96 45 00 47, Fax +45 96 45 00 48, email !!<>!!firstname.lastname@example.org!!<>!! - web !!<>!!www.asetek.com!!<>!! !!<>!!.
By placing this order you are agreeing to these conditions.