Order within
The IceGiant ProSiphon Elite is a powerful and unique CPU cooler that brings the ProSiphon technology is based on the thermosiphon effect, a technique normally reserved for commercial or High-Performance Computing, to the home. Compatible with most modern AMD and Intel chipsets, the IceGiant ProSiphon Elite can achieve cooling performance comparable to a custom-made water cooling system.
At first glance, the ProSiphon Elite appears to consist of a large heatsink and four 120mm PWM fans. However, this is no ordinary air cooler. It uses IceGiant's patented technology offers powerful cooling.
This is a technique that has not been previously used for consumer applications. Essentially, a liquid dielectric at the bottom of the cooler will quickly evaporate once the CPU starts heating up. The evaporated liquid transfers the excess heat to the outer edges of the condenser, where the fans expel the heat from the cooler. The cooled liquid then returns to the bottom of the condenser, ready to start the process all over.
ProSiphon Elite’s patented ProSiphon cooling process means the CPU cooler effectively dissipates heat, whilst its efficient design makes it extremely durable. So much so, you’ll be provided with a ten-year IceGiant warranty.
As well as the condenser, four dedicated PWM fans are attached to the unit. Thermal Grizzly Kryonaut paste is also included to ensure strong heat transfer between the cooler and CPU.
Standard air CPU Coolers make use of hollow chambers line with a wick and a small amount of coolant. Once the CPU begins heating, the excess heat is transferred via a contact plate to the heat pipes and the liquid begins to evaporate.
As the vapour rises through the chamber, the excess heat moves from the cooler to numerous fins lining the edges of the cooler. Then cool air is blown on to the fins via fans, meaning the vapour cools back to its liquid form, which is absorbed by the wick.
The issue with this process is that if the liquid is heated to excess levels, it begins to boil inside the hollow sections of the heatpipes. This means the liquid cannot be absorbed by the wick and it dries out.
The end result is thermal throttling since there is no liquid to absorb the heat generated by the CPU. This is a particular problem with high performance CPUs, such as AMD's Ryzen Threadripper series, that have a TDP of 250 Watts or higher
With the ProSiphon Elite, IceGiant implements an alternative approach. The ProSiphon Elite takes advantage of the coolant's tendency to evaporate with a loop system that directs the vapour to follow through the unit, passing by fins to dissipate the heat and ultimately pushing the re-condensed vapour back to the base of the unit via gravity.
Not only does this result in greater cooling than is typical of traditional air cooled CPU coolers but since there are fewer moving parts the ProSiphon Elite is extremely reliable. It is capable of operating continuously under heavy workloads.
In fact, IceGiant are so confident of the ProSiphon's longevity that they provide a 10-year warranty.
| Additional Contents | |
| Included fans | 4x 120 mm |
| Materials | |
| Materials | Aluminium |
| Product series | |
| Product Series/Family | ELITE |
| Colour | |
| Primary Colour | Black |
| Fan main colour (cage) | Black |
| Fan main colour (rotor) | Black |
| Dimensions | |
| Width | 251 mm |
| Depth | 104 mm |
| Height | 120 mm |
| Weight | 2000 g |
| Fan Specifications | |
| Max. Fan RPM | 2300 rpm |
| CPU | |
| CPU Socket | 1200, 1366, 2011-V3, 2066, AM4, TR4, sTRX4, AM5 |
| Noise | |
| Max. Single Fan Noise dB(A) | 32.2 dB(A) |
| Internal Ports | |
| Fan connectors | 4 Pin (PWM) |
fitted to 13700k the LGA1700 is good for the back plate and standoffs but the two black metal plates that fit the stand offs are poorly machined and would not fit properly used the ones for the LGA 1200 socked and it then fitted well keeping cpu much cooler than dh15 as Asrock z790 taichi asa a back plate the weight is not much of an issue unless you plan to move the case any distance then I would remove it first
About 10 deg.C drop from AMD default cooler with 3900X.Install with mobo OUT of case.Arrives with 2 fans in Pull, I wanted Push so I could put the other 2 in the case roof, however you HAVE to Install heatsink on CPU FIRST as heatsink mounting screws are Under Push fans position, just means having to mount fans AFTER heatsink.No nuts for the fan mounting screws(due to the expectation of mounting on heatsink)
Brilliant cooler got and fitted mine today got a 10c drop on a 3970x thread ripper against the 360 Rog AIO I was using only a few issues (1) you need to make fit a support bracket bracket as 2kgs is a lot (2) If your ram is tall your screwed it needs to be low profile(3) If your on a Asus board you cant use the rog dimm slot for your 2 extra m2 ssds as its too tall However going from 85c on load to 75c on load is worth it for me (tested on identical system setup apart from cooler)Would recommend this 100% on a thread ripper cpu
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
