Thermal Grizzly Minus Pad Extreme - 100 × 100 × 1 mm

The Thermal Grizzly Minus Pad Extreme is an excellent choice for applications where thermal paste is not an option due to its cumbersome application. This is particularly useful when distances between the heat source and the heat sink need to be bridged - for example with memory chips and voltage converters. The silicone-based thermal pad has a consistency similar to modeling clay.

This enables ideal surface design with maximum possible compaction. Thermal conductivity has been improved by approximately 260% over the Minus Pad 8, enabling the best performance for difficult cooling operations such as voltage regulators and memory ICs.

The Minus Pad Extreme is available in different sizes and thicknesses - here 100 x 100 x 1 mm. The pads work excellently even with very low contact pressure, and the thermal conductivity is only slightly influenced by the thickness. The choice of thickness should therefore depend entirely on the gap to be bridged. The Minus Pad Extreme is electrically insulating. Due to the consistency, only one-time use is recommended.

Danger! This product comes with a protective film that must be removed before installation. We assume no liability for damage caused by incorrect or incorrect assembly and improper use!

Technical details:
- Dimensions: 100 x 100 x 1mm
- Amount: 1
- Density: 3.38 g/cm³
- Hardness: 65 Shore 00
- Dielectric strength: 8 KV/mm ASTM D149
- Operating temperature: -100 to +250 °C
- Flammability: V-0
- Color: Rust brown

UK Delivery

Order by 4pm (Monday to Friday) or 3pm (Saturday) for Next Day Delivery*
*Exclusions and product restrictions apply
Full Delivery Information

International Delivery

Delivery to over 40 countries
Full Delivery Information

Returns

14 Day return and refund period
Full Returns Information