Below is the original description for this product, any reference to warranty is to be ignored. Warranty for B Grade items is 90 days, or 1 year for Ex-Demo PC Systems.
B Grade items may have been used, have damaged packaging, missing accessories or a combination of these (Motherboards may be missing I/O shields).
Some items may have scuff marks or slight scratches but should otherwise be an operable product.
The
View 37 ARGB-Midi-Tower is something very special from
Thermaltake. As with the
View 28,
the left side panel and the lid are completely made of one piece of transparent acrylic glass and this allows a wide view into the interior of this high-end case. Powerful hardware and above all complex and colorful water cooling systems will be right at home. The
View 37 ARGB offers
installation options for two 420 radiators. Another highlight are the two vertical PCI slot bezels at the back of the tower, to which a graphics card can be attached vertically, thus also displaying the impressive cooler design of installed graphics cards.
The Thermaltake View 37 ARGB Midi-Tower at a Glance:
- L-shaped side panel made of acrylic glass
- Graphics cards up to 41 cm (without front fan), vertical installation possible
- Place for two 420 radiators
- I/O Panel with 2x USB 3.0, 2x USB 2.0 and HD Audio
- Front with tinted acrylic glass
- 3x Preinstalled RGB-LED fans including RGB fan hub
Thermaltake View 37 ARGB: Ingenious design & Functionality
The Thermaltake View 37 ARGB is suitable for E-ATX, ATX, Micro-ATX and Mini-ITX motherboards. The manufacturer has also come up with something special for the installation of the graphics card. In addition to eight horizontal PCI slot brackets, the case has
two vertical PCI slot brackets. Thus a - maybe even RGB illuminated - high-end gaming graphics card can be put on display. A mounting bracket is already attached to the case, but this can be removed later. Whether horizontal or vertical, the graphics card can be up to 41 centimeters long.
The front consists mainly of dark tinted acrylic glass. Above it is the I/O panel, which has two USB 2.0 and two USB 3.0 ports in addition to the obligatory audio connections and power/reset buttons. For the
control of the RGB lighting of the fans Thermaltake uses a small controller. This is connected to a button at the front of the housing and enables control over the lighting modes. Alternatively, the button can be used as a reset button and the RGB fan hub can be controlled via a motherboard with ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync or ASRock Polychrome RGB.
Air and Water Cooling Options
Beside the impressive design
Thermaltake the
View 37 ARGB also placed a lot of value on functionality. A 420 millimeter radiator can be installed in the front, as long as you do without the two stylish pre-installed 200 millimeter RGB LED fans. Instead of the drive cage and the motherboard tray, pumps and reservoirs/AGBs can be accommodated. Due to the use of tempered glass, the custom water cooling can be admired from the side and from above - with
stylish RGB lighting setting the scene.
If you prefer air cooling, you can install three smaller 120 or 140 fans in the front instead of the two pre-installed
200 mm fans with RGB LED lighting. To the right of the motherboard tray there is room for three 140 or 120 mm fans. A 120 or 140 fan can be installed on the rear wall as well as in the bottom of the case. A
dust filter on the bottom extends over the entire underside and can be pulled out and cleaned at the rear. A further dust filter covers the entire front side. Behind the mesh grille at the front end of the right side part the third dust filter is held in place by a magnet.
Storage Space
The power supply unit is installed in the bottom of the housing and may be up to 220 millimetres long. In front of the power supply there is a hard disk cage for three 2.5" or 3.5" drives. Up to eight additional 2.5-inch SSDs or four 3.5-inch HDDs can be mounted behind the motherboard tray without the need for tools.
Note: The PCIe riser cable required for vertical mounting of the graphics card is not included and must be ordered separately. The graphics card should not be wider than two slots for vertical installation.
Technical Details:- Dimensions: 261 x 525 x 538 mm (W x H x D)
- Weight: approx. 11.3 kg
- Material: steel (SPCC), plastic, acrylic
- Color: Black
- Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX
- fan possible in total:
2x 200 / 3x 140 / 3x 120 mm (front)
3x 140 / 3x 120 mm (right side)
1x 140 / 1x 120 mm (back side)
1x 140 / 1x