Endgame Gear OP1 Switch Pack - Huano 100m 50-55gf, set of 2

The switches you use on the Endgame Gear OP1 gaming mouse can be swapped out and replaced with an Endgame Gear OP1 Switch Pack. This set contains a pair of enthusiast-grade mechanical micro switches, perfect for tailoring your OP1’s click to suit your exact specification. Each switch comes pre-soldered to a PCB, making installation a simple and easy process. There are seven switch types to choose from!

Endgame Gear OP1 Switch Pack: Huano 100m 50-55gf Switches at a Glance:

• Two pack of enthusiast-grade mechanical micro switches
• Huano 100m 50-55gf switches
• Switches pre-soldered to PCBs
• Easy to install
• Requires a PH000 screwdriver
• Compatible with the OP1, OP1 RGB, and OP1 8K

Each switch comes pre-installed and soldered to PCBs, to ensure simple and quick installation. To install the Endgame Gear OP1 Switch Pack, follow these simple steps:

1. Unscrew the two bottom screws on the underside of your OP1 gaming mouse
2. Carefully open the back
3. Remove the main button switch cables
4. Hold the shell to the left and use a PH000 screwdriver (not included) to undo the PCB screws
5. Remove the original switches and add the new pair to the top shell
6. Use the PH000 to screw the new PCB into place
7. Plug the main button switch cables back in
8. Replace the back shell and secure in place with the screws

Compatibility

The Endgame Gear OP1 Switch Pack is currently compatible with the following gaming mice:

• OP1 Gaming Mouse (Black/White)
• OP1 RGB Gaming Mouse (Dark Frost/White Frost)
• OP1 8K Gaming Mouse (Black/White)

Compatibility with the OP1we Series is currently not supported.