Endgame Gear OP1 Universal Switch Set - 2x Switch PCBs + 14 Switches

The switches you use on the Endgame Gear OP1 gaming mouse can be swapped out and replaced with an Endgame Gear OP1 Universal Switch Pack. This set contains two PCBs and seven pairs of switches, allowing you to experiment with the different feedback and actuations of these enthusiast-grade mechanical micro switches. Perfect for tailoring your OP1’s click to suit your exact specification.

Endgame Gear OP1 Universal Switch Pack at a Glance:

• Two pack of enthusiast-grade mechanical micro switches
• Pack of two PCBs and fourteen switches
• Switches click into place on PCBs
• Easy to install
• Requires a PH000 screwdriver
• Compatible with the OP1, OP1 RGB, and OP1 8K

Each switch can easily be pressed onto the universal PCBs, to ensure simple and quick installation. They will need to be properly aligned, or the switch won’t activate when you press it. Should this happen, you simply need to rotate the switch and try again. To install the Endgame Gear OP1 Universal Switch Pack, follow these simple steps:

1. Unscrew the two bottom screws on the underside of your OP1 gaming mouse
2. Carefully open the back
3. Remove the main button switch cables
4. Hold the shell to the left and use a PH000 screwdriver (not included) to undo the PCB screws
5. Remove the original switches and add the new pair to the top shell
6. Use the PH000 to screw the new PCB into place
7. Plug the main button switch cables back in
8. Replace the back shell and secure in place with the screws

Compatibility

The Endgame Gear OP1 Switch Pack is currently compatible with the following gaming mice:

• OP1 Gaming Mouse (Black/White)
• OP1 RGB Gaming Mouse (Dark Frost/White Frost)
• OP1 8K Gaming Mouse (Black/White)

Compatibility with the OP1we Series is currently not supported.