Lian-Li
Top Sellers

Lian-Li
PC-D888WX 8Pack Edition ATX Cube Case - Black

  • Finally
  • in conjunction with Lian-Li Industrial Co. Ltd
  • Ian '8Pack' Parry has unleashed the PC-D888WX E-ATX Cube PC Chassis
  • with the ultimate in radiator and hardware support.
 

2 In stock

£579.95 *
 
 
 
pay with amazon payments finance with V12 Finance

Stock Code: CA-739-LL

EAN: 4718466007131

MPN: PC-D888WX

Manufacturer: Lian-Li

tech communitySupported by the biggest tech community forums.overclockers.co.uk
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews
 
Product information:

PC-D888WX 8Pack Edition ATX Cube Case - Black

Finally, in conjunction with Lian-Li Industrial Co. Ltd, Ian '8Pack' Parry has unleashed the PC-D888WX ATX Cube PC Chassis, with the ultimate in radiator and component support for any hardware enthusiast looking for the uncompromising best in class computer case for their water-cooling needs. The PC-D888WX has phenomenal liquid-cooling support, with no less than 6 separate radiator mount options including up to 360mm radiators on the bottom and rear of the case, two 360mm radiators on the top of the case, a further 120mm radiator on the rear of the case and a 480mm radiator on the front of the case, all of which can support push/pull configurations if required, which gives the user a vast amount of cooling potential to create some amazing watercooled setups, especially with integrated mount space for a pair of pumps!

As is standard with all Lian-Li cases, the D888WX is made completely from aluminium, with various rubber grommets for intricate cable management opportunities throughout the chassis. Hardware support is comprehensive, with space for E-ATX motherboards of all sizes, 420mm VGA cards, 420mm ATX PSU's, 165mm CPU coolers, along with a pair of HDD racks that can support 6 x 3.5" HDD's or 4 x 2.5" HDD's, including hot-swap backplanes on both racks. Connectivity is also well covered, with 4 x Super Speed USB3.0 ports and HD Audio/Microphone connectors on the front I/O panel.

The attractive side window has the 8Pack logo etched in the corner, and there is the option to replace the front drive bay cover with an 8Pack designed version if you prefer. Installation is a breeze with pop-off side panels & front bezels, along with tool-less mounting for the hard drives. The D888WX has been meticulously redesigned from the D666WRX chassis by 8Pack to offer everything needed to build the best PC around, conforming to and even surpassing 8Pack's elite tier standards for an enthusiast PC case, which is why it is used to house the most premium system in the 8Pack range - The Supernova, with heavily overclocked Quad SLI NVIDIA Geforce Titan X GPU's and an Intel i7 Extreme 5960X CPU fully water-cooled to the highest possible standard.

The D888WX is an astounding mix of looks, hardware support and water-cooling potential and is fully 8Pack approved for only the best hardware the market has to offer.

Specifications

- Model: PC-D888WX
- Case Type: Full Tower Chassis
- Dimensions: (W) 380mm, (H) 597mm, (D) 511mm
- Colour: Black with Window
- Front bezel Material: Aluminium
- Side Panel: Aluminium
- Body Material: Aluminium
- Net Weight: 12.3kg
- 5.25" drive bay (External): 5
- 3.5" drive bay (External): None
- HDD bay: 3.5" HDD x 6 or 2.5" HDD x 4
- Expansion Slots: 8
- Motherboard: E-ATX, ATX, Micro-ATX
- System Fan (Front): 120mm Fan x 4 (Optional)
- System Fan (Rear): 120mm Fan x 4 (Optional)
- System Fan (Top): 120mm Fan x 6 (Optional)
- System Fan (Bottom): 120mm Fan x 3 (Optional)
- Watercooling Radiator Support: Bottom: Up to 360mm, Front: Up to 480mm, Top: Up to 2 x 360mm, Rear: Up to 360mm + separate 120mm, Dedicated Pump Mount for 2 Pumps
- I/O Ports: USB3.0 x 4, HD Audio
- Maximum Compatibility: VGA Card length: 420mm, PSU length: 420mm, CPU cooler height:165mm
- PSU: ATX(Not Included)
- Gross Weight: 14.6Kg
 

More links for "PC-D888WX 8Pack Edition ATX Cube Case - Black"

 

Product Specification:

Case type
Full-Tower
Form Factor
E-ATX, ATX, Micro-ATX
Side panel
Windowed
Colour
Black
Main colour
Black
Accent colour
Black
Width (exact)
380
Height (exact)
597
Depth (exact)
511
USB 3.0
4
Audio output
2x
Internal 3.5" bays
6x
PCI slots
8x
120mm Fan
17
Radiator-mounting
1x Single (120mm), 1x Triple (360mm), 1x Quad (480mm), 2x Triple (360mm)

Customer review

100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
Star Rating

Average customer rating

(from 1 customer reviews)
Last 6 Months (1)
All Time (1)
 

Very good modification from the 666

This is a modification to the 666 LIan LI

Im not going to cover the good areas these are easy to see from the above info and its lian Li so its well built feels great looks great etc...

Cons
its a tad pricey for the modified version, unmodified also comes with fans (yes we all tend to swap them but its worth a note on costs)

its very tight trying to fit in the PSU, im not mounting anything on the pump bracket so it rattles against the PSU (i used a rubber spacer to solve the issue)

its also surprisingly tight on space everywhere, it could really have benefited from being 5cm taller (above the mobo tray) and another 5cm deep (easier for rad installations, it could be a little deeper than that to allow for a 480 in the front while also fitting 360 in top and bottom
another cm on both sides would have helped for ease but not a big deal

there should really have been filters installed on the bottom fan mounts, there is one for the PSU but none for the 3 intake fans on the left side, this is my biggest complaint, as its Alu you cant use a magnetic filter to cover them, and the case is still very heavy when fully installed so cleaning standard filters will be hard

Once you get a long PSU in there (which if you need this case then you need a big PSU) all the cables will end up in a very small gap for your sata cables and power cables, it creates a very messy small area purely due to the number of cables in the area
(another reason i would have liked 5 cm deeper)

Personally im not keen on the clips holding the case sides on, however they do seem strong and i dont expect them to break but it would have been nice to get a couple of spares

Overall im very happy with the case and if your in the same boat as me and use 5.25 bays this is a great case

i have setup mine with my watercooling on the right, using a bay res with duel pumps

then just fans on the left, all is controlled via a lamptron cw611, my water temps have reduced greatly and im using slower less powerful fans. its just due to not having the heat from chiptset, ram, gpu etc increasing the temp of the air going into the rad

however my hdd have increased in temp by 10c as this case has no dedicated fan to cover the hdd cage and behind the cage is a mass of cables anyway

Buy this case if you can just take note of the above when you plan your build, also once it arrives plan how to get it installed to avoid constantly removing the front bay cage lol

IceStorm 2017-06-26
 

Write a review

Reviews will be active after verification

* Required field

 
 
 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    BTO

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.
    Loan Information

    Select Loan Product:

    For more information click here