Lian Li Q58W3 Mini-ITX Aluminium and Tempered Glass Case - White

It’s stylish, it’s sleek, and it’s modular. The Lian Li Q58W3 Mini-ITX Case is part of the Q58 aluminium chassis range. Featuring hinged tempered glass and mesh panels, hot-swappable components, plus a variety of ways to configure, this is an amazing case for building small form factor gaming PCs. The interior is highly modular, with support for hot-swappable SSDs and the choice of two PSU sizes. Its overall design has been primed towards exceptional cable management and for detail orientated builds. Plus, with a capacity of 14.5L, you can pack a lot of hardware within the Lian Li Q58W3 whilst still maintaining excellent cooling.

The Features of Lian Li Q58W3 Mini-ITX Case at a Glance:

• Mini-ITX case manufactured from sand-blasted aluminium and tempered glass
• Hinged panels for easy access to interiors when installing hardware
• Mesh panels with magnetic dust filters for enhanced air flow
• Includes an ATX PSU bracket as well as integrated support for SFX power supplies
• Flexible mounting options for AiO water cooling systems
• 3 expansion slots and support for vertical GPU mounting with included PCIe 3 riser cable
• Available in solid white or two-tone black

Innovative and Versatile Design

Lian Li are back with a new Mini-ITX Case, the Q58W3. Part of an extended range, this chassis has an amazing 14.5L capacity, for all your premium gaming hardware. Many aspects of this case have been curated to support detail orientated builds, as well as ease of use. The side panels are hinged, splitting in the middle to provide ample access to the interiors when installing hardware. As standard, these panels are tempered glass for the top half and aluminium mesh for the bottom half. However, they are hot-swappable meaning you can arrange them any way you like.

With its compact design yet enormous versatility, cable management and innovative features help to keep this case as sleek and efficient as possible. The interior is armed with plenty of Velcro straps and tie-downs for taming cables, whilst many of the features negate the need for extra cables. Behind the Lian Li logo panel on the back, there is a header hub for PWM fans and LED strips. Containing three of each, this interfaces directly with the motherboard and can be controlled via the software you would use to control that hardware.

Granting you great flexibility with your build, there are several modular aspects to the Lian Li Q58W3, in addition to the hot-swap panels. Included within the contents are a PSU ATX bracket and HDD expansion rack, for adjusting support to accommodate larger hardware.

Interior Layout

Despite its small footprint, the Lian Li Q58W3 Mini-ITX Case can support a full contingent of gaming hardware and cooling accessories. Plus, thanks to the modular nature of this case, its size is not a limiting factor of what hardware you install. For your graphics card, there are three expansion slots to support even some of the larger models available on the market. The maximum length it can accommodate is up to 320mm.

Storage can be installed throughout the chassis, most notably with a hot-swappable SSD tray embedded in the top of the case. Situated towards the front, this drive supports a 2.5” SSD and requires no tools for installation. Simply slide it into the slot and your SSD is ready to store your gaming library. No cables need to be unplugged if you decide to switch out for a newer model, either. Additionally, there is an SSD tray on the fan bracket, with this being the extendable drive bay, a mount behind the PSU bracket, and a bottom bracket which can be used for storage or a fan.

In total, you can run up to four 2.5” SSDs or three with a singular 3.5” HDD. It should, however, be noted that the amount of storage drives you have is affected by the size of PSU you install. Naturally, with a larger PSU, there will be less space for extra hardware, but you can still install two 2.5” SSDs with this configuration.

Flexible Cooling Options

When it comes to cooling, the Lian Li Q58W3 Mini-ITX Case has been primed for use with an AiO cooling system, supporting a CPU cooler up to 67mm tall. There are two ways of going about cooling this case, and it all comes down to what size PSU is installed. This is also the deciding factor in what size radiator you have. Thanks to the inclusion of an ATX PSU bracket, you can install this larger power supply instead of an SFX or SFX-L. Referred to as SFX PSU Mode and ATX PSU Mode, here is a deeper look into how this affects configuration.

SFX PSU Mode

With the smaller of the power supply options, there is space for up to a 280mm AiO loop. The supported length is dictated by where you install this hardware, with three options to choose from:

1. Radiator directly mounted onto the top fan bracket;
2. Radiator mounted below the fan or;
3. Radiator mounted below the fan with the front SSD tray removed.

This means there can be a radiator up to 280mm mounted on the top panel, whilst the bottom can hold a 120mm radiator. For fans, there is support for two fans on the top panel – either 120mm or 140mm – and a singular, 120mm fan on the bottom.

ATX PSU Mode

As you would expect, there are fewer mounting options in the mode with the larger PSU, with support for a 120mm AiO. This can be mounted on the top or the bottom, with fan support for either a 120mm or 140mm on the front and just 120mm on the bottom panel.

Sleek Exteriors

Manufactured from a sand-blasted aluminium, the Lian Li Q58W3 Mini-ITX Case has a sleek brushed-effect finish. This model is a stylish, clean white. The interiors are supported by a stainless-steel frame, whilst the side panels are either 1mm aluminium mesh or 3mm tempered glass.

Integrated upon the front face of the case, the Lian Li Q58W3’s I/O panel is fully equipped to keep you connected. The circular power button contains an LED to indicate power status and if the hard drive is being read. Below this, there is an HD Audio jack, USB 3.1 Type-C port, and a standard USB 3.0. With these connections, you can enjoy up to 5Gbps transmission speeds, or double that with the Type-C.

Additional Extras

There are four models in the Lian Li Q58 Range. Available in white or black, they are either come with a PCIe Gen 3 or PCIe Gen 4 riser cable. Which cable is included is denoted by the name. As the Lian Li Q58W3, this model has the Gen 3 cable to support vertical GPU mounting. If you are looking for Gen 4, then choose the Lian Li Q58X4 or Q58W4.

Thanks to its versatile design, you can arrange the panels on the Lian Li Q58W3 in any configuration you like. If maximising airflow is your priority, the Lian Li Q58W1 Mesh Panels are available for purchase separately. Two additional mesh panels are included. Alternatively, equip two glass panels on the outward facing side should your primary focus be showing off your premium hardware.

What’s more, there are also exclusive LED strips available for separate purchase too. These stylish strips can add a splash of colour to your case, attaching to the bottom and top edges. Using side-diffused LEDs, the Lian Li Q58W2 LED Strip Kit connect to the embedded 3-pin 5V RGB headers concealed behind the Lian Li logo.

---

When purchasing accessories for your Q58, models containing an X are black, whilst those with a W are white. This is true for the cases, themselves, too.

---

Lian Li Q58W3 Mini-ITX Case Specifications:

Brand	Lian Li
Series	Q58 Mini-ITX Case
Model	Q58W3
Colour	White with tinted tempered glass
Riser Cable Generation	PCIe 3.0
Dimensions	342mm x 170mm x 250mm
Capacity	14.5L
Materials	Exterior: Aluminium Interior: SPCC steel Side Panels: 1mm aluminium or 3mm tempered glass
Motherboard Support	Mini-ITX
PSU Support	SFX / SFX-L / ATX* *Included ATX bracket
Fan Support	SFX PSU Mode Top: 2 x 120mm or 2 x 140mm Bottom: 1 x 120mm Depending on where radiator is mounted, max support length varies from 304mm to 325mm ATX PSU Mode Top: 1 x 120mm or 1 x 140mm Bottom: 1 x 120mm
Radiator Support	SFX PSU Mode Top: 1 x 240mm or 280mm Bottom: 1 x 120mm ATX PSU Mode Top: 1 x 120mm Bottom: 1 x 120mm
GPU Support	Max length: 320mm
CPU Cooler Clearance	Max 67mm
Drive Support	SFX PSU Mode 4 x 2.5” SSDs or 3 x 2.5” SSDs and 1 x 3.5” HDD* ATX PSU Mode 2 x 2.5” SSDs *Using HDD adapter bracker
Expansion Slots	3
I/O Panel	1 x Power button 1 x USB 3.0 1 x USB 3.1 Type-C 1 x HD Audio
Dust Filters	2 x magnetic filters on the bottom
Warranty	1 year

1 Year Warranty

UK Delivery

Order by 4pm (Monday to Friday) or 3pm (Saturday) for Next Day Delivery*
*Exclusions and product restrictions apply
Full Delivery Information

International Delivery

Delivery to over 40 countries
Full Delivery Information

Returns

14 Day return and refund period
Full Returns Information