+44 (0)1782 44 44 55
H510 Midi Tower Gaming Case - White Tempered GlassThe NZXT H510 Midi-Tower offers, like its predecessors, an attractive and minimalist design. NZXT has decided to refresh the front panel with new cutting-edge connectors such as USB Type C.
The Features of the NZXT H510 Midi-Tower at a Glance:
- Minimalist case from NZXT in white
- Two Aer F120 fans pre-installed
- Large tempered glass side window
- Space for a 280 mm radiator in the front
- Bays for up to three 2.5"- and three 3.5" drives
NZXT H510 Midi-Tower: Perfect for Modding!NZXT has opted for the tried-and-tested shape of its predecessors in the H510, complete with smooth and sleek surfaces all in perfect proportion to one another, and the changes on the exterior are primarily of a practical nature. As such, the I/O panel was updated and now offers a USB 3.1 connector (Type C).
Options for Air- and Water CoolingThose who prefer to opt for traditional air cooling will find that the NZXT H510 has plenty to offer: with two in the front and either a 120- or 140 mm fan in the roof, and with space for a 120mm in the back, there's plenty of options. For CPU coolers, there is a maximum of 165 mm height available. NZXT equips the Midi-Tower as standard with two in-house fans from the Aer series: One black 120 mm model in the back as well as in the roof. The fans afford users more than sufficient airflow. The side edges, the bottom of the front cover, and the area beneath the power supply all include removable dust filters.
NZXT even took into consideration a wide range of custom water cooling options: in the front, users can install a 280- or 240mm radiator. The rear of the case supports a 120 mm radiator. The thickness of both radiators is limited to a maximum of 60 mm. The cable cover between the motherboard and the front of the case allows reservoirs and pumps with a height of up to 180 mm to be installed.
Abundant Space for HardwareThe interior of the NZXT H510 offers space for the installation of a range of high-end hardware: Mini-ITX, Micro-ATX and ATX motherboards can all be installed in the Midi-Tower. For expansion cards, the case offers seven slots. There are seven slots available for expansion cards, and the graphics card is limited to 381 mm in length.
As was the case with its predecessors, the NZXT H510 does not offer external drive support. Internally however, users are free to install a large number of drives if needed: beneath the PSU shroud lies a hard drive cage. This enables users to install up to three 3.5" hard drives.
Behind the motherboard tray, two 2.5" drives can be mounted vertically. Another 2.5" drive can be installed on the PSU shroud. This means that up to three 3.5" drives- and three 2.5" drives are possible. Behind the motherboard tray, users will find dedicated rails for cable guidance. There are between 19 and 23 mm of space available to help stow away unsightly cables.
- Dimensions without feet: 210 x 435 x 428 mm (W x H x D)
- Dimensions with feet: 210 x 460 x 428 mm (W x H x D)
- Material: Steel, tempered glass
- Weight: 6.8 kg
- Colour: White (outer panels, cable cover), black (chassis)
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total possible fans:
2x 120 mm or 2x 140 mm (front)
1x 120 mm (rear)
1x 120 or 1x 140 mm (roof)
1x 120 mm AER F120 (1200 RPM, 85.66 m³/h, 28 dB(A), rear)
1x 120 mm AER F120 (1.200 U/min, 85.66 m³/h, 28 dB(A), roof)
- Filter: Front, bottom
- Radiator Mountings:
1x 280 or 1x 240 mm (front)
1x 120 mm (rear)
- Drive Bays:
3x 3,5" (internal)
3x 2,5" (internal)
- PSU: 1x Standard ATX (optional)
- Expansion slots: 7 + 2 (vertical)
- I/O Panel:
1x USB 3.0 (USB 3.1 Gen 1, internal connection)
1x USB 3.1 Type C (USB 3.1 Gen 2, internal connection)
1x 3.5 mm jack (4-pin, TRRS, Audio-In/Out)
- Maximum CPU cooler height: 165 mm
- Maximum GPU length: 381 mm
- Max radiator size:
Front: 60 mm
Rear: 60 mm
1x NZXT H510
1x Set mounting screws
10x Cable binders
1x Headset adapter (1x 3.5 mm 4-pin to 2x 3.5 mm 3-pin)
- Manufacturer's guarantee: 2 Years