Order within
The EK-Nucleus AIO CR360 Dark is an all-in-one liquid cooling solution offering a pitch-black cooler without any RGB. It is designed to fit most of the popular cases on the market today and features a double fan setup with a slim 360mm radiator. Compatible with most modern processors, it is also ready for the next-gen Intel socket and AMD socket AM5.
Rotatable Pump Top
The top allows you to re-orient the EK badge no matter in which direction the cooler is installed. The orientation can be changed in 90° increments, so if the cooler is installed upside down, rotate it 180 degrees to display the logo right side up. Regardless of the angle needed to install the AIO, it will always offer clean and aligned aesthetics.
New Positioning of Rotary Fittings
New EK-Nucleus AIO Dark comes with pre-installed and reinforced rubber tubing, featuring fine nylon mesh sleeves and aluminum covers on each tube that ensure extreme durability. Improved fitting positions allow for easy installation and adjustment of the rubber tubing, making this Nucleus AIO suitable even for the tightest of spaces.
Daisy-chainable Fans
To reduce cable clutter and the number of headers that need to be utilized on the motherboard or fan controller, EK-Loop FPT fans allow daisy-chaining.
Universally Compatible and Easy to Install
All EK-Nucleus AIOs have a universally compatible CPU water block, fitting all the latest Intel and AMD CPU sockets. The installation process is very straightforward, thanks to the included manual and mounting mechanism. This product requires enough space to mount a single slim 360mm radiator, making it compatible with almost all modern cases.
A special tool is included that allows users to screw down and tighten the stand-offs easily without hurting their fingers. This is another benefit to the user experience while mounting this AIO.
Technical Specifications
-Radiator Dimensions: 400 x 124 x 27 mm
-Radiator Material: Aluminum
-Fan Compatibility: 120 mm
-Pump Unit Dimensions: 82.3 x 69.2 x 61.6 mm
-Pump Unit Material: ABS housing, ABS top ring
-Pump Speed Range: 3100 RPM ± 10%
-Pump PWM Range: 20 - 100%
-Tubing Material: Ultra-Low Evaporation Rubber with Nylon Braided Sleeve
-Tubing Length: 370 mm
-Fan Dimensions: 120 x 120 x 25mm
-Fan Speed Range: 550 - 2300 ± 10%
-Fan Noise Level: 36 dB (at maximum speed)
-Fan Air Flow: 72 CFM = 122,33 m³/h (at maximum speed)
System Requirements:
-4-Pin PWM Header for pump and fan operation
Enclosed:
-EK-Nucleus AIO CR360 Dark unit
-EK-FPT FAN 120 - Black Full Pressure Technology Fan (3x)
-Mounting Kit
-User Manual
Compatible CPU Sockets:
- Intel Sockets LGA: 1150, 1151, 1155, 1156, 1200, 2011, 2011-3, 2066 + Next-gen Intel Socket, 1700
- AMD Socket: AM4, AM5
- 5 Years Limited Warranty
| Colour | |
| Primary Colour | Black |
| Fan main colour (cage) | Black |
| Fan main colour (rotor) | Black |
| Fan Specifications | |
| Fan Size | 120 mm |
| Type | |
| CPU Cooler Type | AiO liquid cooler |
| Additional Contents | |
| Included fans | 3x 120 mm |
| Materials | |
| Materials | ABS, Aluminium |
| Dimensions | |
| Length | 400 mm |
| Width | 124 mm |
| Height | 27 mm |
| Fan height | 25 mm |
| Radiator size | 360 mm |
| Tube length | 370 mm |
| CPU | |
| CPU Socket | 1700, 1150, 1151, 1155, 1156, 2011, 2011-V3, 2066, AM4, AM5 |
| Noise | |
| Max. Single Fan Noise dB(A) | 36 dB(A) |
| Internal Ports | |
| Fan connectors | 4 Pin (PWM) |
| Pump connectors | 4 Pin (PWM control) |
Not long finished upgrading to this cooler and it's made quite the difference! Install was easy peasy , props that this cooler is more simplistic , daisy chain fans and the whole thing only needs 2 pwm fan headers to operate. Totally recommended!
This is one of the best coolers you can buy if not THE BEST do not hesitate buy this cooler you will be amazed
Not a fan of RGB, so this fitted my needs exactly. Why pay for extra bits that you don't need? I bought this to replace my Alpenfohn Icewater 280mm AIO. Both the Alpenfohn and this EK AIO are high quality built items, I have no problem recommending either. I went from 280mm to 360mm to see how much difference it made, and to lose the RGB. I am running an i7 13700K with a 4090 GPU, so there is quite a bit of heat generated in my case, especially during the recent hot weather. This AIO lets me run CPU 31-32 degrees at idle, and it ramps up to a massive 45-48 degrees gaming (sic). Even running 3D benchmark the CPU only hits around 65 degrees at its max. Please note I am running a -0.1000 undervolt on the CPU. I had the Alpenfohn mounted vertically in the front of the case, as it ran colder there. This AIO has no problem being top mounted and shifts warm air really well. Overclockers offered free delivery locally, and it arrived two days before I was expecting it, on a Sunday!! Cannot fault.
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
