Order within
EK-XTOP DDC 3.2 PWM Elite - Acetal (incl. pump) is a High-Performance water cooling pump. The core of the unit is the market-proven EK-DDC 3.2 PWM water pump (4-pin PWM FAN header). This unit offers increased hydraulic performance (up to 15 %) compared to original factory top.
PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!
This top features two G1/4 threaded ports of which one is an inlet on top and one is an outlet on the side of the unit. EK recommends EK-ACF series compression fittings.
Despite a remarkably small footprint of 2.4" square, the pump features an astounding 7m of head to provide superior flow rates in today's most complex liquid cooled systems. The pump is also a high reliability, high pressure industrial pump, featuring a 50,000 hour MTBF (5 year lifetime).
Top is made of quality POM Acetal material. The pump is nested inside the EK-DDC Heatsink Housing. This vastly improves the cooling performance of the motor and electronics and thus prolongs the lifespan of the water pump. Optimal heat transfer is ensured by the use of thermal pad inside the housing. Due to it's metallic construction and finned design EK-DDC Heatsink Housing amplifies the effect of airflow therefore placing the water pump in front of any fan or radiator will dramatically improve the cooling performance.
EK-DDC Heatsink Housing is made from cast ZAMAK (zinc, aluminum, magnesium, copper) alloy and features features glossy black paint finish.
This product also features vibration dampening rubber mounting system which effectively de-couples the water pump from the rest of the computer chassis.
EK-XTOP DDC 3.2 PWM Elite - Acetal can also be upgraded with either EK-UNI Pump Bracket (120mm FAN) - Regular or Vertical which allow installation of the product in any position with 120mm type fan hole pattern as shown on the picture below:
Specifications:
- Dimensions (W x D x H): 63 x 68 x 55 mm
- Motor: Electronically commuted ball bearing motor
- Rated voltage: 12 V DC
- Power consumption: 18 W
- Maximum head pressure: up to 5.2m
- Maximum flow rate: up to 1000 L/h
- Maximum liquid temperature: 60 °C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector: Sata Power - and 4-Pin PWM FAN connector
- Xylem original model name: DDC-3.25TPPWM4
Contents:
- EK-XTOP DDC - Acetal
- EK-DDC 3.2 PWM 12V DC pump motor
- mounting mechanism
- installation manual
Made in Slovenia - EU!
Pump motor made in Hungary - EU!
| Pump Specifications | |
| Max. Pressure Head | 5.2 m |
| Max. Water Flow | 1000 l/h |
| Materials | |
| Materials | PPS-GF40, Stainless steel |
| Type | |
| Pump type | DDC |
| Colour | |
| Primary Colour | Black |
| Dimensions | |
| Width | 63 mm |
| Depth | 68 mm |
| Height | 55 mm |
| Power Specifications | |
| Power consumption | 18 W |
| Rated voltage | 12 V |
| Thermal Specifications | |
| Max. System Temperature | 60 °C |
| Water Cooling | |
| Water cooling component | Pump |
| Internal Ports | |
| Pump connectors | 4 Pin (PWM control), SATA (power) |
Once again a quality product from EK, runs silent also looks some better than the pics as the leads are black and not ketchup n mustard.
Keep me up to date with the latest news, product launches and promotions
* Required field
Our customers know our services and this is reflected in the rating they give us. Leave us your opinion and help us to improve it.
