Lian Li Lancool II Mesh C RGB Midi-Tower Case - Black

With its modular design and mesh panelling, the Lian Li Lancool II Mesh C RGB is a highly flexible case with advanced cooling capabilities. Featuring three pre-mounted aRGB fans, this chassis has incredible airflow and dazzling lighting that can be adjusted using the “C” and “M” buttons on the I/O panel. Inside, there is a carefully curated layout that can accommodate up to an E-ATX motherboard, 384mm long GPU, and has 176mm clearance for CPU coolers. Every chamber is easy to access, thanks to the hinging on the tempered glass panels and mesh PSU panel. The Lancool II Mesh C RGB can support all your high-end hardware with a premium finish.

Lian Li Lancool II Mesh C RGB Mid-Tower at a Glance:

• Steel mid-tower chassis with high density mesh panelling and 3 x aRGB fans
• Modular design with dedicated cable management chambers
• Dual hinged tempered glass panels for easy access and the perfect showcase
• Supports up to an E-ATX motherboard and a 384mm long GPU
• Accommodates up to nine SSDs
• Extensive fan and radiator support with a multi-way radiator/fan bracket

Advanced Cooling

The Lian Li Lancool II Mesh C RGB Case has a premium design, carefully curated to facilitate advanced cooling. Many panels of this chassis feature a high-density mesh in a honeycomb pattern, to enhance airflow throughout the case. The natural airflow is boosted by the pre-mounted aRGB fans.

Upon the front panel, there are three 120mm fans, which operate at speeds of roughly 1300RPM. These add a splash of colour to the Lian Li Lancool II Mesh C RGB as well as provide efficient and effective cooling. This lighting can be controlled utilising the “C” and “M” buttons from the I/O panel, when connected to the included fan hub. “C” scrolls through seven colours whilst “M” features seven effects. A secret 8th effect is unlocked when connected to your motherboard instead, and controlled utilising a compatible software.

In addition to this, there is ample and flexible support for fans and radiators across the Lian Li Lancool II Mesh C. As an alternative to the two 140mm fans, the front panel can support three 120mm fans instead whilst the top panel can hold either two 120mm or 140mm fans. Finally, there is accommodation for two 120mm fans on top of the PSU chamber, situated on the mesh panel separating these areas.

When it comes to radiators, the top has capacity for a 240mm radiator when aligned to the left. Granting you amazing flexibility, there is a multi-way radiator/fan bracket that can be situated either closer to the motherboard or front panel. Depending on your hardware and how you want to cool your gaming PC will determine whether it’s in the 55mm or 110mm position.

Whether you rely on air cooling or prefer water-cooled systems, the Lian Li Lancool II Mesh C RGB can accommodate. With 176mm clearance for a CPU cooler, this is a particularly great chassis for AiO cooling loops.

Innovative Design

The interior design of the Lian Li Lancool II Mesh C RGB extends to the hardware installation. In its standard arrangement, this case can support ATX, Micro-ATX, and Mini-ITX motherboards. However, the back panel can be flipped, extending the mounting range and accommodating an E-ATX motherboard, up to 280mm wide. Plus, there are seven expansion slots to host graphics cards up to 384mm in length.

Thanks to the hinged panels, every corner of the Lian Li Lancool II Mesh C RGB Case is easy to access. Both tempered glass side panels open, and are held in place with a magnetic clip. The mesh panels on the PSU shroud also open out, allowing for easy installation of both the power supply and drive cage.

Modular Shroud

Furthering the flexibility of this case, the PSU chamber is modular with space up a power supply up to 210mm long. The drive cage can be positioned either to the left or right, depending on whether you want to install a reservoir or allow for more cable space. This drive cage can host up to three drives, either 2.5” SSDs or 3.5” HDDs. With support for nine SSDs in total, there are six more mounts located across the Lian Li Lancool II Mesh C RGB.

Found in pairs, these mounts are on the tray behind the motherboard, the bottom right flip shroud, and on the top mesh panel of the PSU chamber. SSDs can be mounted in this final location instead of the 120mm fans, depending on your need for storage or cooling. Even with the drives, the mesh is not fully covered, making for excellent ventilation.

Additional Features

The Lian Li Lancool II Mesh C RGB Mid-Tower Case has a fully equipped I/O panel. An improvement on the original Lancool II Mesh, this model features the USB 3.1 Type-C port

as standard. Additionally, there are two USB 3.0 ports and one TRRS audio jack. These are located to the right of the power button whilst the LED controls are to the left.

With tempered glass affording an uninterrupted view to both sides of your gaming PC, the right-hand side features a number of panels. Perfect for concealing cables, these make managing loose ends and wire much easier. Additionally, this is where the integrated hub is situated. Available in black, the Lian Li Lancool Mesh II C RGB will keep your gaming PC will look sleek and tidy.

Lian Li Lancool II Mesh C RGB Mid-Tower Black Specifications:

Brand	Lian Li
Model	Lancool II Mesh C RGB Mid-Tower PC Case
Colour	Black
Materials	Steel 4.0mm tempered glass
Motherboard Support	E-ATX (up to 280mm wide) ATX Micro-ATX Mini-ITX
Expansion Slots	7
Graphics Card Support	GPU up to 384mm long
PSU Support	Up to 210mm long
Integrated Fans	Front: 3 x 120mm aRGB fans Fan speed ~ 1300RPM
Fan Support	Front: 2 x 140mm or 3 x 120mm Top: 2 x 140mm or 2 x 120mm Top of PSU chamber: 2 x 120mm
Radiator Support	Multi-way fan/radiator bracket installed on front panel Front: 1 x 360 / 280 / 240mm Top: 1 x 240mm (aligned to the left)
CPU Cooler	176mm clearance
Drives	Drive Cage: 3 x 3.5” HDDs or 3 x 2.5” SSDs Behind Motherboard Tray: 2 x 2.5” SDDs Behind the Right Flip Panel: 2 x 2.5” SSDs Above PSU Chamber: 2 x 2.5” SSDs
I/O Panel	1 x “C” colour button 1 x “M” mode button 1 x TRSS Audio 2 x USB 3.0 1 x USB 3.1 Type C
Dust Filters	1 x Top magnetic filter 1 x Bottom tray
Dimensions	478mm x 229mm x 494mm D x W x H

UK Delivery

Order by 4pm (Monday to Friday) or 3pm (Saturday) for Next Day Delivery*
*Exclusions and product restrictions apply
Full Delivery Information

International Delivery

Delivery to over 40 countries
Full Delivery Information

Returns

14 Day return and refund period
Full Returns Information