Lian Li once again manages to improve an already extremely functional and stylish case. The
Lian Li O11 Dynamic XL (ROG Certified)-Full-Tower again combines brushed aluminium with tempered glass elements. The dimensions of the case have been adapted so that even the huge SSI EEB ASUS ROG Dominus Extreme motherboard with Intel's C621 chipset and Socket 3647 for Xeon processors can be installed with the help of an optional expansion rail. The Full Tower's wide dual-chamber design, which offers plenty of room for additional high-end gaming components, also means that the case is perfect for cable management. Not only that, the case is designed to support installation of extensive air or custom water cooling hardware.
Features of the Lian Li O11Dynamic XL (ROG Certified) Full-Tower:
- Sophisticated combination of aluminium, tempered glass and steel
- Space for E-ATX-, ATX-, Micro-ATX- or Mini-ITX-form factor motherboards
- 6x 2.5" SSDs & 4x 3.5" HDDs including HDD Hot Swap function
- Frontpanel with 4x USB 3.0 Type-A & 1x USB 3.1 Type-C
- Supports graphics cards up to 44.6 cm length
- Three built-in slots for 360 mm radiators
- Up to ten 120mm fans possible
E-ATX Case with Premium Design: Brushed Aluminium Meets Tempered Glass
The modular
Lian Li O11Dynamic XL (ROG Certified) Full-Tower offers a sturdy steel construction and aluminum exterior panels. The left side panel as well as the front cover are made of tempered glass and allow a view into the inside of the case and the installed hardware.
The right part of the front panel houses the I/O panel with
one USB 3.1 Type C port, two USB 3.0 ports and two of the now standard audio connectors. Two
other USB 3.0 ports are located at the right foot of the front panel. An attractive
RGB-LED strip is located between the I/O panel and the tempered glass panel. It extends from top to bottom and its illumination can be controlled via two switches on the panel. Optionally, the RGB-LED strip can also be connected to a conventional 5VDG slot of an appropriately equipped motherboard.
Plenty of Space for Gaming Hardware
The
Lian Li O11Dynamic XL (ROG Certified) Full-Tower offers plenty of room for powerful gaming hardware. Even Asus' huge SSI EEB mainboard ROG Dominus Extreme can be installed using an optional Lian Li expansion rail.
Graphics cards may be up to 446 millimeters long,
CPU coolers may have a height of 167 millimeters. An ATX power supply unit is installed towards the rear bottom left and may be 210 millimetres in length.
For the installation of an AiO or custom water cooling, the case offers the possibility of
accommodating up to three 360 mm radiators simultaneously: One in the roof, one at the bottom and one next to the motherboard. The right side panel also has ventilation slots to dissipate the heat. If you want to install three 360 mm radiators at the same time, you should use narrow ones in the lid and a slim radiator next to the motherboard. In general, the installation of three triple radiators is possible, but this requires some attention when choosing components for custom water cooling. There is also the option to install a 280 mm radiator in the roof.
Excellent Airflow for Next-Level Cooling
The radiator slots can, of course, also be fitted with fans. On the side behind the front, on the lid and on the bottom there may be
up to three 120s, on the roof and on the bottom there can be two 140s instead of
three 120s should you prefer. For clean cable management there are several partly rubberised cable bushings available, which are placed alongside other things on the middle plate next to the motherboard. The right chamber accommodates hardware that emits less or no heat and that does require specialist cooling, such as the power supply unit and the HDD drives.
The
Lian Li O11Dynamic XL (ROG Certified) Full-Tower stands slightly elevated on rubberized steel feet to allow cool air to pass through the
dust filtered bottom of the case and into the enclosure. The chimney effect causes warm air to rise to the top, where it escapes through the roof, which is also fitted with a dust filter.
Two further dust filters cover the two perforated grids in the right side. The elegant
Lian Li O11Dynamic XL (ROG Certified) Full-Tower is not only a real eye-catcher and can easily accommodate gaming hardware, it also happens to be ideal for PC enthusiasts who want to cool their hardware with a custom loop.
Drives: Up to 10 Storage Devices can be Mounted in the Case!
For mounting the drives,
there are two HDD cages in which
four 3.5-inch HDDs or four 2.5-inch HDDs/SSDs can be accommodated. The four slots are accessible from the rear of the case and are covered by a perforated panel.
Three 2.5-inch drives can also be mounted on the rear of the motherboard tray. In addition, there are three more 2.5-inch slots on a bracket at the front next to the motherboard tray. Instead, the bracket can also be attached to the floor, for example to make room for a radiator or the optional expansion rail next to the board. A total of four 3.5-inch and six 2.5-inch data drives can be mounted.
Note: If you want to install your graphics card or even graphics cards vertically in the Lian Li PC-O11Dynamic XL Full-Tower, you can purchase the optional Lian Li O11D-1 (GELI-821) expansion kit.
Warning! Only this kit is compatible with the Lian Li O11 Dynamic XL (ROG Certified) Full-Tower! It contains a slot bracket and a high quality riser cable. For the vertical installation of a second graphics card a second riser cable is required, which is also available from Lian Li (GELI-822).
Technical details:
- Dimensions: 285 x 513 x 471 mm (W x H x D)
- Material: Steel (interior), aluminium (cover, side panel, front, feet), tempered glass (front, side panel)
- Weight: Approx. 10.1 kg
- Color: Silver, Black (HDD Cages, Gromits, TG Frames, Dust Filters)
- Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX (EEB with optional expansion rail)
- Fans possible in total:
3x 120 mm / 2x 140 mm (floor)
3x 120 mm / 2x 140 mm (cover)
3x 120 mm (side panel, front)
1x 120 mm (rear) - Radiator Mountings (no fan slots required):
1x max. 360 mm / 280 mm (lid)
1x max. 360 mm / 280 mm (bottom)
1x max. 360 mm (side panel, without SDD brackets) - Filters: Base, lid, side panel
- Drive bays:
4x 2.5/3.5-inch drives (internal)
6x 2.5-inch drives (internal) - Power supply: 1x ATX (optional)
- Expansion slots: 8
- I/O Panel:
1x USB 3.1 Type-C (internal connection)
4x USB 3.0 Type-A (internal connection)
1x per Audio In/Out
On/Off switch - Maximum graphics card length: 446 mm
- Maximum CPU cooler height: 167 mm
- Maximum power supply length: 210 mm
