+44 (0)1782 44 44 55
Xflow Copper Radiator III - 360 mmWith the Xflow Copper series, MagiCool has a special series of radiators on the market that do not have inlet and outlet at the same end as usual, but have the inlet on one end and the outlet on the other end, which in many systems meaningful hose routing significantly simplified. At the same time, radiators with a thickness of just 27 mm are ideal for use with relatively little space - but thanks to copper fins with 16 FPI, there is no need to dispense with cooling capacity. The fans can be mounted on one or both sides - with the triple variant offered here, up to six pieces in 120 mm format can be used.
When buying an Xflow Copper heat exchanger, the length should be considered in addition to the height of 27 mm, in this triple model it is 392 mm - plus connectors, which are mounted directly on the front sides, they each have a G1 / 4 inch thread on. The necessary screws for mounting three fans and for mounting in the housing are included, as well as three decoupling frame for vibration damping.
- Dimensions: 120 × 27 × 392 mm (W x H x D)
- Weight: approx. 800 g
- Material: copper (lamellas), brass (chambers)
- Colour: Black
- Compatible fans: both sides 3 × 120 mm
- Fins density: 16 FPI
- Pressure tested up to: 1.5 bar
- Thread: 2 × G1 / 4 inches
- 12 × screws UNC 6-32 long (30 mm)
- 12 × screws UNC 6-32 short (5 mm)
- 3 × decoupling frame