Pallas 140mm Low Profile CPU Cooler

  • 0R100004
  • Socket Compatibility: 775 / 1150 / 1155 / 1156 / 1151/ 1200/ 1366 / 2011 / AM2 / AM2+ / AM3 / FM1 / FM2/ AM4
  • AM4 Bracket here -https://www.overclockers.co.uk/detail/index/sArticle/66632

Out of stock

£38.99 *
pay with credit card pay with amazon payments pay with bitcoin Pay by Finance with Hitachi Personal Finance

Stock Code: HS-005-RT

EAN: 4715109920277

MPN: 0R100004

Manufacturer: Raijintek

tech communitySupported by the biggest tech community forums.overclockers.co.uk
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews
Product information:

Pallas 140mm Low Profile CPU Cooler

PALLAS, Raijintek’s 140mm low profile CPU cooler, is designed for most desktop, especially for low profile desktop. Total height - 68mm including 14013 PWM fan, PALLAS is designed by German Engineer for presenting its greatly enhanced airflow and surface for heat dissipation. PALLAS is full heat-sink nickel plating and with super slim 14013 PWM fan. PALLAS also supports Intel and AMD modern CPU sockets and platforms.


- 140mm Low profile cooler – total height 68mm including 14013 PWM fan.
- Specially designed for most desktop system, especially low profile system.
- Patented copper mirror base and full heat-sink nickel plating.
- Enhanced airflow and surface for heat dissipation.
- 6pcs powerful 6mm heat-pipes
- Super slim and powerful 14013 PWM fan and silent level
- Supports Intel & AMD modern CPU sockets and platforms.
- Intel socket LGA 775/1150/1155/1156/1200/1366/2011 CPU (Core™ i3 / i5 / i7 CPU)
- AMD Socket FM1/FM2/FM2+/AM2/AM2+/AM3/AM3+ CPU

**For an AM4 bracket please visit the manufacturer support page with proof of purchase of the cooler and proof of purchase for the Ryzen CPU. We have some brackets available here - https://www.overclockers.co.uk/raijintek-am4-brackets-hs-029-rt.html . **


More links for "Pallas 140mm Low Profile CPU Cooler"


Product Specification:

CPU Socket
1150, 1151, 1155, 2011, 2011-V3, AM3+, FM2+, AM2+, AM4, 2066, 1156, 1200
CPU Cooler type
Fan connector
4Pin (PWM control)
CPU Cooler width
150 up to 159 mm
CPU Cooler height
60 up to 69 mm
CPU Cooler depth
150 up to 159 mm
CPU Cooler width (exact)
153 mm
CPU Cooler height (exact)
68 mm
CPU Cooler depth (exact)
150 mm
Bottom plate material
Nickel plated Copper
Heatsink (fin) material
Weight in grams
500 - 600 g
Max rpm
1000 - 1500 U/min
Max volume
25 - 30 dB(A)
Max flow rate
75 - 100 m³/h
Min rpm
500 - 750 U/min
Number of heatpipes
Diameter of heatpipes
6 mm
CPU Cooler fan supplied
1x 140 mm
Heatsink colour
Fan colour
Red, White
Additional fans can be installed
Cooling type

Customer review

50% (1)
50% (1)
0% (0)
0% (0)
0% (0)
Star Rating

Average customer rating

(from 2 customer reviews)
All Time (2)

Used for a friends build.

I installed this cooler for a build I wan doing for a friend. He picked it as he liked the fact it would help with the VRM cooling as well as the CPU. I found it fairly easy to fit and had no issue with it interfering with other heatsinks on the motherboard. The cooling is far better than I expected from this type of cooler and very close to the Ereboss I was using. I can only give this 5 stars due to its performance and cost. My friend loves it and thinks it resembles a heave duty exhaust system for a car. If I needed a cooler that was small in height I would have no reserves in using this in one of my own builds.


Excellent, but very difficult to fit

I bought this heat sink after reading some good reviews online. I have an older Lynnfield i7, and wasn't planning on doing heavy gaming. It's a long story - this was bought to replace a dilapidated watercooling system on a gaming PC I had abandoned for nearly a year.

I'll be honest, getting this heat sink on is a nightmare. With my motherboard, there was only one way around it would fit - it does fit, for sure, but with my voltage regulator heat sinks on the motherboard almost scraping it.

The REAL PROBLEM with this heat sink is the way it mounts to your motherboard. The instructions are clear enough, but the fitting system is very poor - trying to screw it down was a nightmare, and the supplied thermal paste was only enough for one attempt. In the end, it took about five attempts to get it to mate properly! I actually had to use sellotape to help the screws slot into place! And now the IHS on my processor is now heavily scratched. Still works fine though!

As for the cooling performance, I am very impressed - my room is fairly cold, but it idles nicely at around 25-30 degrees. It doesn't overheat during intensive gaming, and actually handles prime 95 very very well - and this is in a case with not a single additional fan - just the GPU and CPU fan! So the cooling performance is great!


Great cooling performance, but installation is tricky. This may well just have been me, but I have fitted at least 10 heatsinks / waterblocks in my time, perhaps more. It's not tiny - but certainly small enough for what I needed.

Would I recommend it? Absolutely! If you're exceptionally handy, this would definitely be a five-star product.


Write a review

Reviews will be active after verification

* Required field

Awards & Media Coverage

  • KitGuru - Worth Buying

    "For those looking for a low-profile CPU cooler, the Pallas is a strong contender. I did encounter 3 different issues while installing it, though, so any improvements there would be welcome."

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    Bought to order

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.