Thermal Grizzly
Top Sellers
Thermal Grizzly Kryonaut High Performance Thermal Paste - 5.5g / 1.5 ml

Thermal Grizzly
Kryonaut High Performance Thermal Paste - 5.5g / 1.5 ml

  • Thermal Grizzly Kryonaut Thermal Paste was specially developed for extremely demanding applications and the most demanding of Overlocking community

50+ In stock

£15.95 *
pay with credit card pay with amazon payments pay with bitcoin Pay by Finance with Hitachi Personal Finance

Stock Code: TH-001-TG

EAN: 0753677507203

MPN: TG-K-015-R

Manufacturer: Thermal Grizzly

tech communitySupported by the biggest tech community
Direct Service Hotline
+44 (0)1782 44 44 55
What our customers say about us
4.8 Google Customer Reviews
Product information:

Kryonaut High Performance Thermal Paste - 5.5g / 1.5 ml

Thermal Grizzly Kryonaut Thermal Paste was specially developed for extremely demanding applications and the most demanding of Overlocking community. Kryonaut also recommended as a top product for critical cooling systems for industrial use.

Kryonaut uses a special support structure, with no drying processes and starts at 80 ° C. This support structure ensures that the contained nano-aluminum and tin oxide portions of the paste combine perfectly and so any unevenness of the heat output (eg the CPU) and a heat sink are optimally compensated with outstanding thermal conductivity.

- Designed especially for overclocking
- Excellent thermal conductivity
- No cure time
- High long-term stability

Ideal Applications:
Thermal Conductivity: 5*
Extreme Overclocking: 5*
Overclocking: 5*
Watercooling: 5*
Air cooling: 5*
Silicone Sensitive Applications: Do Not Use

- Thermal Conductivity: 12.5 wm / k
- Viscosity: 120-170 Pas
- Spec. Weight: 3.7 g / cm3
- Temperature: -200 ° C / + 350 ° C
- Content: 5.5g / 1.5 ml

More links for "Kryonaut High Performance Thermal Paste - 5.5g / 1.5 ml"


Customer review

100% (3)
0% (0)
0% (0)
0% (0)
0% (0)
100% (1)
0% (0)
0% (0)
0% (0)
0% (0)
Star Rating

Average customer rating

(from 3 customer reviews)
Last 6 Months (1)
All Time (3)

Probably the best stuff you can get.

Used loads of different pastes over the years, don't feel like I need to list them as its all the usual suspects, as I needed some new paste I did a quick search to see what is currently rated as the best stuff and this came up, after using I'm happy to say you get a good application with a blob in the middle and the it has improved the thermals on my ryzen with stock rgb prism cooler by around 3 degrees so no complaints, will be using this on a permanent basis now.

Lan Dempsey 2020-02-20

Great stuff!

Well over the years I have tried many of the thermal pastes out there, this sits at the top!

I was always a AS5 fan but then switched mainly to Céramique 2. I decided to give this stuff a go and wow, what a paste! Im running a 3570K at 4.2Ghz 1.2v with a CM 212X cooler. I am getting 37*c average idle and max 65*c full load under prime. And thats in a tight mid case!

Also running an i3 on stock clocks and volts, sits at 35*c idle or lower with a CM TX3 90mm on low fan speed.

It's very easy to apply, very easy to clean off too! And the best part is, great temps out the box with no break in or cure time.

If you want to spend that bit more and get some slightly lower temps over Céramique 2 or AS5 then get this stuff. I mean Céramique 2 and AS5 is what, over 10 years old now?

The new kid on the block defo has proved itself.


James Pell 2016-09-12

Best ever TIM

I used this between my Corsair H100 AIO water cooler and an i5 4690K. It's overclocked to 4.5GHZ and was previously using Arctic Silver 5. I read some great reviews about this Kryonaut and decided to give it a go to bring my temps down a few degrees when testing using Intel Burn Test and small FFT's in Prime 95. I was blown away with the results... Previously my max temps were 81 degrees after a few hours CPU stress testing. Using this Kryonaut and applying it with the 'credit card' method instead of a blob in the middle of the CPU, my max temps were 71 degrees! That is a truly amazing 10 degree drop in temps. It may be a combination of the thermal paste and applying it on the CPU with a different method. I held the syringe in my hand for 5 mins or so to make it a little easier to apply using one of the 2 adaptors supplied and simply painted it on as thin as possible. Works a treat. I did seem to use a little more than I thought I should, but the results speak volumes. I certainly applied a lot more than I would using the size of a grain of rice in the middle of the CPU.
This stuff is simply the business and will work well on my laptop CPU's, as apparently metal based thermal paste like AS5 shouldn't be applied to aluminium heat sinks, as they degrade the aluminium.
Use this paste... you won't be disappointed with the results and worth the extra wonga

Jon 2016-05-10

Write a review

Reviews will be active after verification

* Required field

Awards & Media Coverage

  • eTeknix - Extreme Performance

    “Thermal Grizzly may be the new kid on the block, but they’ve certainly got a product that can proudly go head-to-head with many of the best thermal pastes on the market.

 Recently Viewed
    Stock level indicator

    Pre Order

    New item that you can order before we receive stock. Orders will be shipped on a first come first served basis. If an ETA is available it will be displayed on hover.

    Bought to order

    Items that are bought by us when a purchase is made, this generally is for highly expensive items, items with a very slow run rate or speciality items

    In stock

    The item is in stock.

    Due today

    The item is out of stock and expected to arrive today.

    ETA: XX.XX

    The item is out of stock and estimated to arrive on the date provided.

    Built To Order

    The Item is built to order. As you change the options, the stock status will automatically update depending on your selection.

    Out of stock

    The item is out of stock and estimated delivery date is not known at this time.